Sub memory
The projector is provided with a sub memory function to register plural pieces of image adjustment data even they are determined to be the same signal by the frequency and form of the synchronization signal source.
Use this function when the user needs adjustment of picture quality such as aspect switching and white balance using the same signal source.
How to register into sub memory
A new signal cannot be registered into sub memory. A new signal must undergo signal registration.
LIST OF SUB MEMORY
1-
1-
1- 3: – – –
1- 4: – – –
1- 5: – – –
1- 6: – – –
1- 7: – – –
1- 8: – – –
:SELECT ENTER:CHANGE
DO YOU REGISTER SUB MEMORY?
NAME: | |
MEMORY NO: | – – |
S.S.NO: | – – – |
INPUT NO: | RGB1 |
fH: | 48.00kHz |
fV: | 60.00Hz |
SYNC. STATE: | H(POS) |
| V(POS) |
Press the USER button or the 
and 
buttons on normal screen (menu is not displayed).
(A “Check
Select the SUB MEMORY number stored with the 
, 
, 
and 
buttons in the “Signal List”. 
Press the ENTER button.
A “Change registered signals” screen will appear.
If the user wants to use the name automatically displayed without change, do the same as in Step 
.
ENTER:EXECUTE MENU:ESC
Procedure to switch to sub memory
Press the USER button or the 
and 
buttons on normal screen (menu is not displayed).
The screen will show a list of the
In the “Signal List”, select the 
, 
,
and 
buttons.
Press the ENTER button.
Signal will be switched to the one that was selected in Step 
.
How to erase sub memory
The currently selected SUB MEMORY is deleted by pressing the standard button (STD) at the “REGISTERED SIGNAL LIST” or the “SUB MEMORY LIST”.
45
