Important Information

Precautions for Use

Cautions when transporting

zzWhen transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal parts and result in malfunctions.

zzDo not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

JJDo not set up the projector outdoors.

zzThe projector is designed for indoor use only.

JJDo not use under the following conditions.

zzPlaces where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts and result in malfunctions.

zzNear the exhaust of an air conditioner or near lights (studio lamps, etc.) where temperature changes greatly (Operating environment Æpage 79): Doing so may shorten the life of the lamp or result in deformation of the outer case and malfunctions.

zzNear high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.

JJDo not install the projector at elevations of 2700 m (8858 ft) or higher above sea level.

Failure to do so may shorten the life of the internal parts and result in malfunctions.

JJDo not use the projector installed vertically or tilted right or left (Æpage 21 ).

Using the projector at a vertical angle that exceeds 40° may reduce product life or result in malfunction.

JJBe sure to ask a specialized technician when installing the product to a ceiling.

If the product is to be installed hanging from the ceiling, purchase an optional Ceiling Mount Attachment (Optional accessories Æpage 16).

Please call a specialized technician or contact an Authorized Service Center for installation.

12 - ENGLISH