Projecting

Check the connections of the peripheral devices and connection of the power cord (Æpage 26) and switch on the power (Æpage 28) to start the projector. Select the image and adjust the state of the image.

Selecting the image

Select an input signal.

The image selected with the <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, or <COMPONENT> button is projected (Æpage 32).

Attention

zzImages may not be projected properly depending on the connected device and DVD, video tape, etc. to be played. Select a system format that is suitable for the input signal in [Component] or [RGB] in the [Input] menu (Æpage 39).

zzCheck the aspect ratio of the screen and the image and select the optimum aspect ratio using in the [Screen] menu (Æpage 48).

How to adjust the state of the image

1111Adjust the projection angle.

zzFor details, see “Adjusting front adjustable feet” (Æpage 24).

2222Adjust the zoom and the focus.

Turn [Zoom lever] and [Focus ring] to adjust the image.

Focus Ring Zoom Lever

Note

zzIt is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

zzIf you adjust the focus, you may need to adjust the size of the image by moving the zoom lever again.

zzIf keystone distortion occurs, see “KEYSTONE” (Æpage 49).

Basic Operation

ENGLISH - 31