Basic operations by using the remote control

Operation Basic

Using the AV MUTE function

button

Press the < AV MUTE> button on the remote control to black out the image. To restore to normal, press the < AV MUTE> button again or press any button.

zzWhen the Logo is not set, the screen changes each time you press the < AV MUTE> button as follows.

black out

 

projected image

 

 

 

zzThe projected Logo (the logo can be set according to users’ favorite) is transferred from computer to the projector by “Logo Transfer Software” on the supplied CD-ROM and is set as [User] in the Logo selection(Æpage 53), the screen changes each time you press the < AV MUTE> button as follows.

black out

 

Logo

 

projected image

 

 

 

 

 

Note

zzWhen use the <MUTE> button to release the [AV mute] function, the mute function can not be operated at the same time.

Using the P-TIMER button

Press the <P-TIMER> button on the remote control to operate the Count up/Count down function.

button

Press <P-TIMER> button on the remote control.

Note

zzTo stop the count time, press the <P-TIMER> button. To cancel the [P-timer] function, press and hold the <P-TIMER> button.(Æpage 56)

Using the LAMP button

This function allows you to select the lamp mode for changing the brightness on the screen.

button

Press <LAMP> button on the remote control.

Note

zzFor details, see “Lamp Power” of "Setting" under Main menu. (Æpage 57)

Using the D.ZOOM buttons

This function allows you to enter to the Digital zoom +/– mode.

buttons

Press <D.ZOOM> (▲/▼) buttons on the remote control.

Note

zzFor details, see "Screen" of Main menu.(Æpage 49)

Controlling the volume of the speaker

You can control the volume of the projector’s speaker or audio output.

buttons

Press the <VOLUME> (+/–) buttons on the control panel or on the remote controller to adjust the volume. The volume dialog box appears on the screen for a

few seconds.

Note

zzFor details, see “Volume” of "Sound" under Main menu. (Æpage 51)

34 - ENGLISH