Replacement

2222Replace the air filter units.

zzPut new filters back into the position. Make sure that the filters are fully inserted to the projector.

JJResetting the Filter Counter

Be sure to reset the Filter counter after replacing the filter. (Æpage 59 " Filter counter reset")

Attention

zzTurn off the power before you replace the air filter unit.

zzWhen attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the event of the air filter unit dropping.

zzDo not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading picture quality.

zzDo not put anything into the air vents. Doing so may result in malfunction of the projector.

zzDo not wash the filters with water or any other liquid matter. Otherwise the filters may be damaged.

JJAttaching the Filter Cover to the Projector

The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on the ceiling.

1111Turn over the projector.

To Ceiling Mount

2222Remove the filter cover (bottom). (Æpage 62)

3333Attaching the filter cover to the projector.

zzPush the cover as the picture shown.

4444Attach the projector to the ceiling mount in accordance with the instruction manuals which come with the ceiling mount.

Attention

zzPlease keep the filter cover (bottom) for later use.

zzIf the Projector Mount Base ET-PKV100B is applied, the supplied filter cover is unnecessary.

Filter Cover (supplied)

Projector

Maintenance

ENGLISH - 63