Settings

Setting

JJPIN code change

The PIN code can be changed to your desired four- digit number.

1111Press ▲▼ to select [PIN code change] and then Press <SELECT> button.

zzCurrent Pin code dialog box appears.

2222Press ▲▼ to enter the current code. Press ► button to fix the number and move the red frame pointer to the next box.

zzThe New PIN code input dialog box appears.

3333Repeat these steps to set a new PIN code.

Fan

1111Press ▲▼ to select [Fan] and then Press <SELECT> button.

2222Press ▲▼ to select one option.

zzThis function provides the following options in the cooling fans’ operation when the projector is

turned off.

L1 Normal operation

Slower and lower-sound than

L2 the normal operation (L1), but it takes more time to cool the projector down.

Fan control

1111Press ▲▼ to select [Fan control] and then Press <SELECT> button.

2222Press ▲▼ to select one among options as below.

zzChoose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.

Off Normal speed.*1

On1 Faster than Off mode.*2

On2 Faster than On 1 mode.*3

*****Set this function to [Off] when using the projector in non-high altitude environment.

*****Select this mode when using the projector in high altitudes (about 1,200 meters or more above the sea level) where the fans have less cooling effect.

*****Select this mode when using the projector in higher altitudes ( than above where the fans have lesser cooling effect).

Note

zzFailure to set the running speed of cooling fans properly may affect the projector life.

zzThe fan noise becomes louder in [On 1] and [On 2].

Video delay control

This function allows you to make a digital processing of a projected image faster.

1111 Press ▲▼ to select [Video delay control] and then Press the <SELECT> button.

2222 Press ▲▼ to select one item between On and Off.

Note

zz[Noise reduction] and [Progressive] can not be selected when Video delay control function is set to [On].

Filter counter

This function is used to set a frequency for the filter replacement.

1111 Press ▲▼ to select [Filter counter].

2222 Press ►or the <SELECT> button to access the submenu items.

JJFilter counter

Show the total accumulated time of the filter use timer

setting.

JJTimer

To set a timer. When the projector reaches the selected time the filter warning icon appears on the screen.

1111 Press ▲▼ to select [Timer] and then press the <SELECT> button.

58 - ENGLISH