Input menu

Select [Input] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.

Remote Control

Control Panel

Computer 1: RGB/Component /RGB (Scart)

1111Press ▲▼ to select [Computer 1].

2222Press ► to access the submenu.

3333Press ▲▼ to select RGB, Component or RGB(Scart).

4444Press the <SELECT> button.

zzWhen [Computer 1] is selected, [Component] or [RGB(Scart)] can be available.

 

There is no signal input from the computer.

- - - -

 

Check the connection between your

 

 

computer and the projector.

 

The preset system is manually adjusted in

Mode 1

 

the PC adjust Menu. The adjusted data can

 

 

be stored in Mode 1-10.

 

PC Systems provided in this projector

SVGA 1

 

is chosen. The projector chooses a proper

 

 

system provided in the projector and

 

displays it.

* Mode 1 and SVGA 1 are examples.

1111Press ▲▼ to select [System].

2222Press ► or the <SELECT> button to access the submenu.

3333 Press ▲▼ to select the desired system.

HDMI

Press ▲▼to select [HDMI] and then press the <SELECT> button.

 

 

Video

Computer 2: RGB

 

Press ▲▼ to select [Video] and then

Press ▲▼ to select [Computer 2 (RGB)]

 

press the <SELECT> button.

 

 

and then press the <SELECT> button.

 

 

Settings

JJComputer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 74-77.)

 

When the projector can not recognize the

AUTO

 

connected signal conforming to the

 

 

provided PC Systems, Auto is displayed

 

on the System Menu box and the Auto PC

 

adjustment function works to display proper

 

images. If the image is not projected

 

properly, a manual adjustment is required.

S-video

Press ▲▼ to select [S-video] and then press the <SELECT> button.

JJVideo System Selection

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is [PAL-M] or [PAL-N], select the system manually.

ENGLISH - 39