Operation Basic

Powering ON/OFF

Turning Off the Projector

1111 Press the <ON/STAND-BY> button on the top

 

control or on the remote control, and Power off?

 

appears on the screen.

Power off? disappears after 4 seconds.

 

2222 Press the <ON/STAND-BY> button again to turn off the projector. The <POWER> indicator starts to blink red, and the cooling fans keep running.

At this time, you can unplug the AC power cord even if the fans are still running.

3333 When the projector has cooled down enough, the <POWER> indicator stops blinking and you can turn on the projector.

Note

zzDo not put the projector in a case before the projector is cooled enough.

zzWhile the <POWER> indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the <POWER> indicator stops blinking to turn on the projector again

zzThe projector can be turned on after the <POWER> indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

JJDirect Power Off function

Even if you turn on the <ON/STAND-BY> during projection or just after the lamp turns off, the cooling fan will continue to rotate using internally stored power. In cases where the <ON/STAND-BY> switch is not easily accessible, such as during ceiling mount, you can safely turn off the power by using the power breaker switch. This function also works if a power outage occurs or if the power cable is accidentally disconnected from the outlet right after turning the power off.

Note

zzWhen using the Direct power Off function, you can not restart the projector immediately after the power is disconnected. The lamp remains high temperature and needs to be cooled, so it sometimes takes longer time than usual for the lamp to light up again.

zzWhile the cooling fan is operating, do not place the projector inside a box or bag.

30 - ENGLISH