Settings

Screen

Select [Screen] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the sub-menu.

Remote Control

Control Panel

Normal

Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.

Press ▲▼ to select [Normal] and then press the <SELECT> button.

Full

Provide the full screen image.

Press ▲▼ to select [Full] and then press the <SELECT> button.

Wide(16:9)

Provide the image at the 16:9 wide screen ratio.

Press ▲▼ to select [Wide(16:9)] and then press the <SELECT> button.

True

Provide the image in its original size. When the original image size is larger or smaller than the panel

size (1280 x 800),* the projector enters to the panning mode automatically.

1111 Press ▲▼ to select [True] and then press the <SELECT> button.

2222 Press ▲▼◄► to pan the image.

zzWhen adjusted, the arrows will turn red. When reached to the correction limits, the arrows will

disappear.

*Screen size (1280 x 800) is only for PT-VW330U. Screen size (1024 x 768) is for PT-VX400U.

Note

zzWhen input computer signal to the projector, [True] will be available.

zz[True] is disabled and cannot be displayed when [480i], [576i], [480p], [576p], [720p], [1035i] or [1080i] is selected in the PC System Menu.

zzWhen [True] is selected in the Screen menu, [Digital zoom +/-] can not be selected.

Natural wide (PT-VW330U Only)

Modify the 4:3 aspect ratio image to fit the screen size by stretching the image to make it look natural.

Press ▲▼ to select [Natural wide] and then press the <SELECT> button.

Note

zzWhen input video signal to the projector, [Nature wide] will be available.

Zoom

 

 

 

Custom

Scale the image proportionally to fit the entire screen.

 

 

Provide the last stored aspect screen image.

Either side of image may go over the screen.

 

 

Press ▲▼ to select [Custom] and press

Press ▲▼ to select [Zoom] and then

 

 

the <SELECT> button.

press the <SELECT> button.

 

 

 

48 - ENGLISH