Setting
JJLogo PIN code change
Logo PIN code can be changed to your desired four- digit number.
1111Press ▲▼ to select [Logo PIN code change].
2222Press the <SELECT> button.
zzCurrent logo PIN code dialog box appears.
3333Press ▲▼ to enter the current code.
zzThe New Logo PIN code input dialog box appears. Set a new Logo PIN code, a confirmation box appears, choose Yes to set the new Logo PIN code.
Attention
zzBe sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer 2 input or monitor output.
1111 Press ▲▼ to select [Terminal] and then press the <SELECT> button.
2222 Press ▲▼ to switch the item.
Computer 2 | Computer input |
Monitor out | Monitor out |
Note
zzTerminal function is not available when selecting [Computer 2] to the input source. Change the input source to the others (HDMI or Computer 1 or Video) so that the Terminal function will be available.
Settings
HDMI setup
This function is only used for HDMI input source.
1111Press ▲▼ to select [HDMI setup].
2222Press ► or the <SELECT> button.
zzThe names for the output setting of Digital R/G/ B vary from equipment to equipment.
JJImage
Normal When the output of Digital R/G/B equipment is set to Standard.
Enhanced When the output of Digital R/G/B equipment is set to Enhanced.
JJSound
HDMI | When Digital input source is input, | |
Sound is set to HDMI. | ||
|
Computer When DVI input source is changed
2 to HDMI input source, Sound is set to Computer 2.
Attention
zzFor details, refer to the operating instructions of your Digital R/G/B equipment.
P IN P
This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen.
1111 Press ▲▼ to select [P IN P].
zzYou can also press the <P IN P>button on the remote control to display [P IN P] menu
2222 Press ► or <SELECT> button to access the submenu.
zzOnly the sound from the source of Main picture is valid, while the source of Sub picture cannot output the sound.
JJMode
1111 Press ▲▼ to select [Mode] and then press the <SELECT> button.
2222 Press ▲▼ to select one mode among the items as below.
P IN P Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu
Side by Provide the images of Main picture Side and Sub picture at the ratio of 4:3.
Off Turn off the P IN P function.
Attention
zzIn [P IN P] the larger picture is main picture, and the smaller one is sub picture; in [Side by side], the left picture is main picture, and the right one is sub picture.
54 - ENGLISH