Settings
Information
Select [Information] from the Main Menu (see “Navigating through the menu” on page 36), then select the item from the
Remote Control | Control Panel |
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of
the projector.
You can also Press the <INFO.> button on the remote control to display the Information menu.
JJInput
The selected input source is displayed.
JJSystem
The selected system is displayed.
The selected
The horizontal frequency of the input signal is displayed in KHz, or - - - KHz when no signal.
The selected
The vertical frequency of the input signal is displayed in Hz, or - - - Hz when no signal. Numbers of Hz doubles when during Interlace.
JJScreen
The selected Screen size is displayed.
JJLanguage
The selected language is displayed.
JJLamp power
The selected lamp mode is displayed.
JJLamp runtime
The cumulative lamp operating time is displayed.
JJPower management
[Off] , [Ready] or [Shut down], and [Timer] are displayed.
JJKey lock
The selected Key lock icon is displayed.
JJPIN code lock
[Off], [On 1] or [On 2] is displayed.
JJRemote control
The selected remote control code is displayed.
JJSerial number
The serial number of the projector is displayed. The serial number is used to service the projector.
JJTotal power savings
The saved amount of power and the exhausted CO2 are displayed.
60 - ENGLISH