Panasonic PV-DV852 Lens Cap and Grip Belt, Attaching the Shoulder Strap, Inserting a Cassette

1

2

3

1

1

2

1

OPEN/EJECT

1

2

3	PUSH	4
	TO CLOSE
		1
		R E C
		SAVE

Lens Cap and Grip Belt

To protect the Lens surface, attach the Lens Cap. Adjust the length of the Grip Belt to the size of your hand.

1Attach the longer loop of the Lens Cap Cord to the Lens Cap.

2Attach the shorter loop to the grip belt.

3Put your hand through the Grip Belt and adjust the length.

≥The removed Lens Cap can be hooked onto the grip belt 1. (When you are not recording, be sure to keep the Lens Cap attached to the Lens for protection.)

~~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Shoulder Strap

We recommend that you attach the Shoulder Strap before going outdoors to record so as to avoid dropping the Palmcorder.

1Pass the tip of the Shoulder Strap through the Shoulder Strap Holder on the Palmcorder and pull the Shoulder Strap.

2Fold the tip of the Shoulder Strap, pass it through the

Shoulder Strap Length Adjuster, and pull it.

≥Pull it out more than 1 inch (2 cm) 1 from the Shoulder Strap Length Adjuster so that it cannot slip off.

~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Cassette

When power is supplied to the Palmcorder, the cassette can be taken out without turning the Palmcorder on.

1Slide the [OPEN/EJECT] Lever to the right and pull down to open the Cassette Compartment.

2Insert a Cassette.

3Close the Cassette Compartment and lock the Cassette Compartment by pressing the [PUSH TO CLOSE] mark.

4Close the Lower Cassette Compartment Cover.

≥For other notes, see page 59.

ªAccidental Erasure Prevention

Opening the accidental erasure prevention slider 1 on the cassette (by sliding it in the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure protection slider (by sliding it in the [REC] arrow direction.)

13