Panasonic PV-DV852 Digital Effect Functions Camera Mode, Index Search Functions l31

ªDigital Effect Functions (Camera Mode)

(l27)

≥If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to [MAGICPIX], you need to adjust the focus manually. However, you cannot adjust the shutter speed and iris and cannot select White Balance.

≥If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set to [MONO] or [SEPIA], the selected White Balance Mode cannot be changed.

≥You cannot use Program AE with Gain-up Mode

[MAGICPIX].

≥When [PROGRESSIVE] on the [CAMERA SETUP] Sub-Menu is set to [ON], it is not possible to use any of the digital modes in [EFFECT1] on the [DIGITAL EFFECT] Sub-Menu.

Wipe Mode and Mix Mode (Camera Mode) (l27)

If either one of the following operations is carried out, stored images will be erased, and Wipe and Mix Functions cannot be used.

≥Use the Camera Search Function ≥Press the [STILL] Button ≥Switch the [TAPE/CARD] Selector

Multi-Picture Mode (Camera Mode) (l28)

≥When [PROGRESSIVE] on the [CAMERA SETUP] Sub-Menu is [ON], Multi-Picture Mode cannot be used.

≥If the [MULTI] Button is pressed while self-recording Mirror mode (l20) is used, the still picture is displayed from the upper right corner of the screen, but, in reality, the picture is recorded from the upper left corner as usual.

≥The quality of images recorded in Multi Mode deteriorates slightly.

≥Multi Mode cannot be used in still picture mode or when mega-pixel recording is set.

P-IN-P Mode (l28)

≥Pictures in P-IN-P Mode cannot be recorded with Progressive PhotoShot.

≥If the Palmcorder power is turned off, the smaller picture will disappear.

≥A title cannot be inserted into the smaller picture.

ªIndex Search Functions (l31)

≥Index Search may not be possible at the beginning of tape. ≥Because PhotoShot Index Signals are not recorded on still

pictures recorded in Continuous PhotoShot Mode, the PhotoShot Index Function cannot be used for these still pictures.

≥Scene Index Search may not function properly if the interval between 2 scene index signals is shorter than 1 minute.

ªPlayback Zoom Functions (l32)

≥You cannot adjust volume with the Remote Controller in Playback Zoom Mode.

≥If you turn off the Palmcorder, or if you switch from VCR

Mode to Camera Mode, Playback Zoom Mode is automatically cancelled.

≥Even if Playback Zoom Functions are being used, images that are output from the DV Terminal or Digital Still Picture Terminal are not enlarged.

≥As you enlarge an image, the quality of image suffers.

≥If you select Multi-Picture Mode in the Playback Zoom Mode, equivalent magnification (1k) becomes zoom magnification.

≥During the Playback Zoom Function, the Variable Speed Search Function cannot be used with the Remote Controller.

ªPlayback Digital Effect Functions (l32)

≥Revised signals of images to which digital effects are added during playback cannot be output from the DV Terminal or Digital Still Picture Terminal.

≥You cannot use the Wipe Function or Mix Function while playing back the non-recorded portion of tape.

ªMulti-Picture Mode (VCR Mode) (l33)

≥The quality of Multi images deteriorates slightly.

≥Playback multi-mode screens cannot be output through DV Terminal or Digital Still Picture Terminal.

≥If there is input from the DV Terminal, a multi screen cannot be created.

≥When signals are input from Video Input/Output Jack or Audio-Video Input/Output Jack, a multi screen cannot be re-displayed.

≥Signals input from Video Input/Output Jack or Audio-Video Input/Output Jack cannot be displayed on a multi screen.

≥If you switch the Palmcorder from the Index Multi-Picture Mode over to the Camera Mode, the setting of [SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu is automatically set to [STROBE].

ªListening to Playback Sound Through

Headphones (l29)

If you want to listen to the playback sound of a tape through headphones, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [OUT/PHONES] and connect the headphones to the [PHONES] Jack on this Palmcorder. In this case, no sound (including warning sounds and shutter sounds) will be reproduced through the built-in speaker of the Palmcorder. When the A/V Cable is inserted into the AV Jack, the internal speaker works.

ªSelecting the Sound during Playback

(l29, 34)

You can select the sound by using the [AUDIO OUT] on the [PLAYBACK FUNCTIONS] Sub-Menu.

STEREO: Stereo Sound (main sound and subsound)

L:Left channel sound (main sound)

R:Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit] selected as the [AUDIO-REC] on the [RECORDING SETUP] Sub-Menu, playback sound becomes stereo sound regardless of the [AUDIO OUT] setting if [AUDIO] is set to [MIX].

61