Panasonic PV-DV852 Index Search Functions, PhotoShot Index Search, Scene Index Search

			1
AUTO MANUAL PUSH
MENU	W.B./SHUTTER/IRIS/			SEARCH
	VOL/JOG
2
		DATE/	PHOTO	START/
	OSD			STOP
		TIME	SHOT
	COUNTER RESET		TITLE	ZOOM
	MULTI/			T
		¥REC	A.DUB
	P-IN-P			r
				sVOL
	V/REW	PLAY	FF/W	W
3	6	1	5
	STILL ADV	PAUSE	STILL ADV

4E ; D

2	INDEX	STOP	INDEX	1
	K	∫	L
	SELECT	VAR.		P.B.
		SEARCH		ZOOM

STORE

	MENU
OFF/ON	SET
P.B.DIGITAL	ITEM

1INDEX

Index Search Functions

To facilitate searching of desired scene, this Palmcorder automatically records index signals during recording, as explained in the following.

PhotoShot Index Signal

These signals are automatically recorded whenever still pictures are taken in PhotoShot Mode (l21).

When recording still pictures using the Continuous PhotoShot Mode (l21), the index signal is not recorded.

Scene Index Signal

Scene Index Signals are automatically recorded when you start recording after inserting a Cassette.

However, if the Palmcorder is switched from the VCR Mode to Camera Mode or if the date and time is set before the start of recording, the index signal is not recorded.

≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the

[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is recorded when Recording is restarted after a lapse of 2 hours or longer. If it is set to [DAY], an index signal is recorded when recording is restarted after

the date has changed since the last recording. (While the index signal is recorded, the [INDEX] Indication 1 flashes for a few seconds.)

ªPhotoShot Index Search

1Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [INDEX] >> [PHOTO].

2Press the [9] Button 1 or the [:] Button 2 on the

Remote Controller.

≥With each press of the corresponding button, still pictures recorded in PhotoShot Mode are searched.

≥After Pictures with Sounds are played back for 4 seconds, the Palmcorder switches to the Still Playback Mode.

ªScene Index Search

1Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [INDEX] >> [SCENE].

2Press the [9] Button 1 or the [:] Button 2 on the

Remote Controller.

2

S 1

≥When the corresponding Button is pressed once, the [S 1] Indication 2 appears, and searching of the subsequent scene marked with an index signal starts. Each time the button is pressed after the start of Scene Index Search, the indication changes from [S 2] to [S 9], and the beginning of the scene corresponding to the selected number will be searched. After reaching the desired scene, playback starts automatically.

≥Up to 9 scene numbers can be selected.

Top Scan

If the [9] Button or the [:] Button is pressed for more than 2 seconds, the Palmcorder will scan for scenes (or PhotoShots) and playback the first

few seconds of each. (To cancel, press the [1] Button 3 or the [∫] Button 4.)

≥For other notes, see page 61.

31