Panasonic PV-DV852 operating instructions Playing Back, Finding a Scene You Want to Play Back

1 VCRCAMERA CARD P.B.

1	MODE
	ON
	OFF

POWER

2

3

SEARCH

2

PUSH4

W.B./SHUTTER/IRIS/

VOL/JOG

3

2

1

1

SEARCH

PUSH2

W.B./SHUTTER/IRIS/

VOL/JOG

AB

CD

! R !

VCR Mode

Playing Back

The recorded scene can be played back immediately after recording.

1Slide the [OFF/ON/MODE] Switch and set the Palmcorder in

the VCR Mode.

≥The [VCR] Lamp lights up. 1

2Push the Operation Lever towards [6] to rewind the tape.

≥Rewind the tape to the point where you want to start playback.

≥When the tape reaches the beginning, rewinding stops automatically.

3Push the Operation Lever towards [1] to start playback.

To Stop Playback

Push the Operation Lever towards [∫] 2.

≥If a Cassette recorded with copyright protection signals is played back, the screen becomes blue or mosaic-like noise patterns appear.

ªAdjusting the Sound Volume

Until the [VOLUME] Indication 3 appears, keep pressing the [PUSH] Dial

4.Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear.

To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off 2 or 3 seconds after the adjustment is finished.

≥When the Playback Zoom Function is in use, the sound volume cannot be adjusted.

≥For other notes, see page 61.

~~~~~~~~~~~~~~~~~~~~~~~~~

Finding a Scene You Want to Play Back

ªCue/Review Playback

Cue Playback A

Push the Operation Lever towards [5] 1 during playback.

Review Playback B

Push the Operation Lever towards [6] 2 during playback.

≥If the Operation Lever is held continuously, it turns to Cue Playback or Review Playback until you release it.

≥If the Operation Lever is pushed briefly, Cue Playback or Review Playback continues even when it is released.

ªHyper Check Function

If you press the [5] Button during fast-forwarding of the tape or the [6] Button during rewinding of the tape, Cue Playback or Review Playback continues for as long as the Button is held down.

ªVariable Speed Search Function

The speed of Cue Playback or Review Playback can be varied.

1During playback, push the Operation Lever towards [1].

≥[1k!] Indication appears. C

2Rotate the [PUSH] Dial and select a desired search speed.

The following 6 playback speeds are available for the Variable Speed Search Function in both the fast-forwarding and rewinding directions. 1/5k (slow playback, SP mode only), 1/3k (slow playback, LP mode only), 1k, 2k, 5k, 10k, and 20k.

≥The same setting can be performed using the Remote Controller’s the [VAR.SEARCH] Button, the [π] Button and the [∫] Button.

Resuming Normal Playback

Push the Operation Lever towards [1].

≥During Cue or Review Playback, fast-moving images may show mosaic-like

noise patterns. This is not a malfunction. ≥The sound is muted during search.

ªRepeat Playback

If you continue to push the Operation Lever towards [1] for 5 seconds or longer, the Palmcorder switches to Repeat Playback Mode, and the [R !] Indication appears D. (To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)

29