Panasonic PV-DV852 operating instructions Digital Zoom Function, Optical Image Stabilizer Function

1

AUTO MANUAL PUSH

MENU

W.B./SHUTTER/IRIS/

VOL/JOG

2

25tW T

D.ZOOM

1, 3	2
OPTICAL IMAGE
STABILIZER	PHOTO
	SHOT

2

12

EIS MEGA EIS

2

FADE

1, 3

1 2

Digital Zoom Function

This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1k to 10k magnification. With the digital zooming Function, you can select a magnification of 25k or 200k.

1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [D.ZOOM] >> [25t] or [200t].

≥25k: Digital zooming to 25k

≥200k: Digital zooming to 200k

2To zoom in or out, press the [W/T] zoom lever towards [T] or

towards [W].

≥As the magnification of digital zooming increases, the quality of image may deteriorate.

Cancelling the Digital Zooming Function

Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].

≥For other notes, see page 59.

~~~~~~~~~~~~~~~~~~~~~~~~

Optical Image Stabilizer Function

If you are recording in unstable situations and the Palmcorder is shaky, you can use this function to correct for camera shake in these images.

≥If the Palmcorder shakes too much, this function may not be able to stabilize images.

1Press the [OPTICAL IMAGE STABILIZER] Button until the [EIS] Indication 1 appears.

2Press the Recording Start/Stop Button or [PHOTO SHOT] Button to start recording.

MEGA EIS (Optical Image Stabilizer) Function

This function increases the effect. We recommend using MEGA EIS (Optical Image Stabilizer) Function when performing Card Photo Shot Function.

3Press the [OPTICAL IMAGE STABILIZER] Button repeatedly until the [ MEGA EIS] Indication 2 appears.

≥For other notes, see page 59.

~~~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In 1

Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.

1Hold down the [FADE] Button while the Palmcorder is set to the Recording Pause Mode.

≥The image fades out gradually.

2When the image is completely gone, press the Recording Start/Stop Button to start recording.

3Release the [FADE] Button about 3 seconds after starting recording.

≥The image reappears gradually.

Fade Out 2

Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.

1Hold down the [FADE] Button while recording.

≥The image fades out gradually.

2About 3 seconds after the image is completely gone, press the recording Start/Stop Button to stop recording.

3Release the [FADE] Button.

≥For other notes, see page 59.

22