Panasonic PV-DV852 To Play Back All the Pictures Continuously, To Stop the Slide Show

MPEG4

STILL VOICE

1

CARD MODE

				8
	AUTO MANUAL PUSH
	MENU	W.B./SHUTTER/IRIS/		SEARCH
1, 6, 7		VOL/JOG	, ,	, 4,
			5,17
			, 2, 3
		EDIT
	640	1280	640
3	640	640	1280	No.5	1
	PUSH MENU TO RETURN9SEC				2

4

M.SLIDE

56

SLIDESLIDE

Slide Show

The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content.

To Select Pictures to Play Back in Your Slide Show

1After setting the [STILL/MPEG4/VOICE] Switch to [STILL], set [CARD FUNCTIONS] >> [CARD EDITING] >>

[SLIDE SHOW] >> [YES].

≥Slide Show editing screen appears.

2Set [EDIT] >> [YES].

3Rotate the [PUSH] Dial to select a picture and then press the dial.

4Rotate the [PUSH] Dial to select playback order and then press the dial.

≥This step is skipped when there are no pictures that has set for the Slide Show.

5Rotate the [PUSH] Dial to adjust the playback time and then

press the dial.

≥The Playback Order Indication 1 and the Playback Time (Second) Indication 2 appear.

≥The [¥] Indication 3 is displayed below pictures that have been selected for the Slide Show.

≥To select the next picture, repeat the Steps 3 to 5 above.

6Press the [MENU] Button to end the setup.

7After setting [SLIDE SHOW] >> [PRESET], press the [MENU] Button.

8Push the Operation Lever towards [1].

≥The [M.SLIDE!] Indication is displayed. 4

To Play Back All the Pictures Continuously

After setting the [SLIDE SHOW] to [ALL], push the Operation Lever towards [1].

≥The [SLIDE!] Indication is displayed. 5

≥All pictures are played back for approximately 5 seconds each, from the first to the last recorded picture, and playback then stops.

To Pause the Slide Show

Push the Operation Lever towards [;].

≥The [(M.) SLIDE;] Indication is displayed. 6

To Stop the Slide Show

Push the Operation Lever towards [∫].

To Verify the Selected Picture

Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [VERIFY] >> [YES].

≥Only the selected pictures are displayed in Multi-Picture Mode in the Playback order.

To Delete the Selected Pictures

1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES].

2Set [DELETE] >> [YES].

3Select the picture you want to delete and press the [PUSH] Dial.

To Reset the Slide Show Setup

Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]

>>[RESET] >> [YES] >> [YES]. ≥Slide Show settings are reset.

≥For other notes, see page 63.

40