1

OPEN

2

1

3

2

1

TAPE

CARD

 

 

 

MPEG4

 

2

STILL

VOICE

 

 

CARD MODE

3, 4

AUTO MANUAL PUSH

Special Features

Using a Memory Card

A Card can be used to record files or play back files.

Use genuine SD Memory Card or MultiMediaCard only.

ªInserting a Card

Before inserting a Card, be sure to turn off the Palmcorder.

1Slide the [OPEN] Lever to the right and open the Card Slot Cover.

2While holding the Card with its cut corner facing right 1, insert it into the Card Slot.

3Close the Card Slot Cover.

Taking out a Card

Open the Card Slot cover and push the side of the card in the middle and then pull it straight out to remove the card.

After removing the card, close the Card Slot cover.

ª[ACCESS] Lamp

While the Palmcorder is accessing the Card (reading, recording, playback, erasing, moving of images), the [ACCESS] Lamp 2 lights up.

While the [ACCESS] Lamp is on, never attempt to: open the Card Slot Cover, pull out the Card, turn off the Palmcorder power, or switch the [TAPE/CARD] Selector. Such actions will damage the Card and cause the Palmcorder to malfunction.

~~~~~~~~~~~~~~~~~~~~~~~~~

Recording on the Memory Card

Three kinds of data can be recorded by selecting with the [STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL] (Card PhotoShot), when recording moving pictures, select [MPEG4] (MPEG4 Recording), when recording voice, select [VOICE] (Voice Recorder Function).

If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder is automatically turned off when you leave it for about 5 minutes without performing any PhotoShot recording.

When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the Tape.

MENU

5 PHOTO SHOT

W.B./SHUTTER/IRIS/

VOL/JOG

ªCard PhotoShot

Still pictures can be recorded on the Memory Card from the Palmcorder lens as well as from scenes that have already been recorded on a cassette.

The size of images that are recorded using this Palmcorder is approximately 1,230,000 pixels. Recording of images with a size that is larger than a million pixels is called mega-pixel still-picture recording. Compared to images of normal recording, images that are created by mega-pixel still-picture recording can be printed out more clearly.

Recording from the Palmcorder Lens (Camera Mode)

F 7 640 PICTURE

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [STILL].

3Set [CAMERA FUNCTIONS] >> [CARD SETUP] >> [PICTURE SIZE] >> [1280k960] or [640k480].

4Set the [PICTURE QUALITY] to desired picture quality.

5Press the [PHOTO SHOT] Button.

The [ PICTURE ] Indication will light in red.

Mega-pixel recording (when you select [1280k960] in step 3) is useful for taking clear pictures, but the following functions are disabled during mega- pixel recording.

Digital zooming (l22)

Digital Effect functions (l27, 28) Title In/Creation (l41)

The power is automatically turned off after about 5 minutes when a card has been inserted.

35

Page 35
Image 35
Panasonic PV-DV852 Using a Memory Card, Recording on the Memory Card, Inserting a Card, Access Lamp, Card PhotoShot