Panasonic PV-DV852 Setting Date and Time, Internal Lithium Battery Recharge, LP Mode

CLOCK-SET

YEAR :2002

MONTH :OCT

DAY :10

HOUR : 2PM

MINUTE:30

PUSH MENU TO RETURN

1, 2

PUSH

W.B./SHUTTER/IRIS/

VOL/JOG

MENU 1, 3

1

CAMERA FUNCTIONS

1.CAMERA SETUP 2.DIGITAL EFFECT 3.CARD SETUP 4.MULTI-PICTURES 5.RECORDING SETUP 6.DISPLAY SETUP 7.OTHER FUNCTIONS

PUSH MENU TO EXIT

1
		RECORDING SETUP
	REC-SPEED		SP	LP
	AUDIO-REC		12bit
	INDEX		2HOUR
	WIND-CUT		OFF
	ZOOM MIC		OFF
	FLASH		ON	AUTO
	RED EYE REDUCTION ON OFF
	FLASH LEVEL NORMAL			r
	RETURN		---- YES
		PUSH MENU TO EXIT

2
		RECORDING SETUP
	REC-SPEED		SP
	AUDIO-REC		12bit	16bit
	INDEX		2HOUR
	WIND-CUT		OFF
	ZOOM MIC		OFF
	FLASH		ON	AUTO
	RED EYE REDUCTION ON OFF
	FLASH LEVEL NORMAL			r
	RETURN		---- YES
		PUSH MENU TO EXIT

Setting Date and Time

1Press the [MENU] Button and rotate the [PUSH] Dial to select [OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].

2Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to a desired value.

≥Year will cycle in the order shown below. 2000, 2001, ..., 2089, 2000, ...

3Press the [MENU] Button to finish setting the date and time.

≥The clock operation starts from [00] second.

≥The menu will disappear when the button is pressed again.

≥It is possible that the built-in clock in the Palmcorder may become inaccurate. Please check the time before recording. If the [0] Indication is flashing, charge the built-in lithium battery and reset the date and time.

~~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the [0] Indication is lit, the internal lithium battery is near discharge.

1Connect the AC Adaptor to the Palmcorder with the power turned off and then connect to the AC Jack.

≥After charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months.

~~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC-SPEED] on the [RECORDING SETUP] Sub-Menu. 1

If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.

Although the image quality does not decrease with the LP Mode recording, mosaic-like noise patterns may appear on a playback image, or some normal functions may be restricted.

≥The contents that are recorded in LP Mode are not completely compatible with other equipment.

≥Audio Dubbing is not possible with LP Mode. (l34)

~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO-REC] on the [RECORDING SETUP] Sub-Menu. 2

High sound-quality recording is possible with “16bit 48kHz 2 track” Mode. With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for re-recording.

19