Panasonic PV-DV852 operating instructions Creating a Title, Inserting a Title

1

2 2, 4, 5, 6, 7, 8

AUTO MANUAL PUSH
MENU	SEARCH
W.B./SHUTTER/IRIS/
VOL/JOG

3 PHOTO SHOT

MPEG4

STILL VOICE

1

CARD MODE

1)	2)
3)	4)
	1)

r

TITLE	MULTI/P-IN-P
1	2, 4 PUSH	3, 4

W.B./SHUTTER/IRIS/

VOL/JOG

6 PHOTO SHOT

TAPE	CARD
5
1	TITLE
	USR00002.TTL	2

Creating a Title

You can create a title and record on a Memory Card.

1Camera Mode:

Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and point the camera at the image you want to use for creating a title.

VCR Mode:

Search for the image you want to use for creating a title and set the Palmcorder to Still Playback Mode.

2Set [CARD SETUP] >> [CREATE TITLE] >> [YES].

3Press the [PHOTO SHOT] Button.

≥The title is stored.

≥To perform PhotoShot again, select [RETURN].

4Rotate the [PUSH] Dial to select [LUMINANCE] and press it.

5Rotate the [PUSH] Dial to adjust the title contrast and then press it.

6Rotate the [PUSH] Dial to select [COLOR] and then press it.

7Rotate the [PUSH] Dial to select desired color and press it.

8Select [RECORD] and then press the [PUSH] Dial.

Selecting Colors

If you make color selection by rotating the [PUSH] Dial when creating a title, you can change the color as follows.

1)Original Color (The color of the captured image)

≥Title in the original color in which the dark portion (blackish portion) of the captured image is missing.

2)Preset colors (black, blue, green, cyan, red, pink, yellow, and white)

≥Title in a preset color in which the dark portion (blackish portion) of the captured image is missing.

3)Original color (the color of the captured image)

≥Title in the original color in which the bright portion (whitish portion) of the captured image is missing

4)Preset colors (black, blue, green, cyan, red, pink, yellow, and white)

≥Title in a preset color in which the bright portion (whitish portion) of the captured image is missing.

~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Title

You can select one of your original titles and display it. (It can be displayed in Camera Mode, VCR Mode, and Card Playback Mode.)

But when the [STILL/MPEG4/VOICE] Selector Switch is set to [MPEG4] or [VOICE], adding a Title is not possible.

1Press the [TITLE] Button.

≥The title that was created last is displayed.

2Press [MULTI] Button.

≥A list of titles is displayed. 1

3Rotate the [PUSH] Dial to select a desired title.

≥The selected title is marked with a red frame.

4Press the [PUSH] Dial or press the [MULTI] Button.

≥The selected title is displayed.

5Using the [TAPE/CARD] Selector, select the recording target.

Camera Mode:	TAPE or CARD
VCR Mode:	CARD
Card Playback Mode:	TAPE

6Press the [PHOTO SHOT] Button.

≥A still picture is recorded under the inserted title.

≥If you record on a Cassette in Normal Recording Mode, set the [TAPE/

CARD] Selector to [TAPE] and press the Recording Start/Stop Button.

2File Name

Clearing a Title Display

Press the [TITLE] Button.

≥The [ACCESS] Indication appears until the titles are displayed completely. Perform the Recording after the Indication disappears.

≥For other notes, see page 63.

41