Panasonic PV-DV852 operating instructions Quick Guide, To watch the Playback Picture

1

2

4

3 TOPUSHCLOSE

5, 6, 7	VCR
	CAMERA

CARD P.B.

MODE

ON

3 CAMERA VCR CARD P.B.

MODE

ON

OFF

1

POWER

2

OPEN/EJECT

Quick Guide

1Charge the Battery. (l12)

≥Connect the AC Cable to the AC Adaptor and AC wall outlet.

≥Attach the Battery to the AC Adaptor. (This will start the charging process.)

≥When the Charge Lamp [CHARGE] goes off, the Battery is fully charged.

≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it.

2Attach the Charged Battery to the Palmcorder. (l12)

≥Attach the battery after tilting the Viewfinder upward.

3Turn the Palmcorder on. (l14)

≥Slide the 1 Switch to [ON]. (The [CAMERA] Lamp lights up.)

4Insert the Cassette. (l13)

≥Slide the 2 lever to the right and pull down to open the Cassette compartment cover.

≥Insert the Cassette.

≥Press the [PUSH/TO CLOSE] 3 to load the Cassette. ≥Close the lower compartment Cover.

5Start recording. (l20)

≥Press the 4 Button. (Recording starts.)

≥Press the 4 Button again to pause the recording.

OFF

5

POWER

4

6

SEARCH

To watch the Playback Picture

6 Switch to the VCR Mode, rewind the tape, and play the tape back. (l29)

≥Slide the 5 Switch to VCR mode. (The [VCR] Lamp lights up.)

≥Push the 6 Lever towards [6]. (Rewind the tape.) ≥Push the 6 Lever towards [1]. (Playback starts.)

CAMERA≥Push the 6 Lever towards [∫]. (Playback stops.)

VCR

CARD P.B.

	MODE
	ON
	OFF	Turn the Palmcorder off. (l14)
7	7
	POWER	≥Set the 7 Switch to [OFF].

7