Panasonic PV-DV852 Recording the Moving Pictures MPEG4, Recording Voice Voice Recording Function

1, 1, 1

TAPE CARD

2, 2, 2

MPEG4

STILL VOICE

CARD MODE

3, 3, 3

R:0h20m MPEG4

1 TAPE CARD

MPEG4

STILL VOICE

2

CARD MODE

3

R:0h20m VOICE

ªRecording the Moving Pictures (MPEG4)

You can record moving pictures for e-mailing on a Memory Card. The recorded data can be also played back on Windows Media Player.

Recording from the Palmcorder Lens (Camera Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Press the Recording Start/Stop Button.

≥It takes 2 to 3 seconds to start recording.

≥During recording, the [ MPEG4 ] Indication appears and is lit in red. ≥The maximum continuous recording time is 60 minutes

The Palmcorder will automatically stop recording when the relevant time listed above has elapsed.

≥When Remaining Time Indication becomes [R:0h00m],

[NO SPACE LEFT] Indication appears. Recording may not be started. ≥The shutter speed is adjustable within the range of 1/30 to 1/500 while

recording moving pictures (MPEG4).

≥The picture size of the moving picture (MPEG4) is set to be [176k144]. ≥When attaching to email, we recommend the picture size to be less than

1MB (about 1 minute length).

≥The following functions are disabled.

≥Digital Zoom (l22)

≥Cinema Function (l23)

≥Digital Effect Functions (l27) ≥Title In/Creation (l41)

≥Fade In/Out Function (l22)

Recording from a Cassette (VCR Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Start playback and press the Recording Start/Stop Button at the desired scene.

Recording from an other equipment (VCR Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Input the image from other equipment then press the

Recording Start/Stop Button at the desired scene.

Maximum recording time on the supplied Card (8 MB)

Approximately 6 minutes

≥The video resolution of the camera is reduced when making an MPEG4 recording. This is done in order to optimize the image quality in MPEG4 recordings, and does not reflect a problem with the software or hardware.

≥For other notes, see page 62.

ªRecording Voice (Voice Recording Function)

You can record voice data on a Memory card.

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [VOICE].

3Press the Recording Start/Stop Button.

≥Voice from built-in microphone is recorded.

≥It takes 2 to 3 seconds to start recording.

≥The recorded file is automatically locked (to prevent accidental erasure).

≥Voice from external microphone connected to the microphone jack can also be recorded.

≥During recording, the [ VOICE ] Indication appears and is lit in red.

≥If a card is not inserted, the Indication flashes in red. ≥When Remaining Time Indication becomes [R:0h00m],

[NO SPACE LEFT] Indication appears. Recording may not be started.

≥For other notes, see page 62.

37