Menu Navigation
ENGLISH - 15
Settings

JDisplaying the main menu

Press the MENU button to display the main menu.

JAdjusting with the bar scale

items

The triangle mark under the bar indicates factory default
setting and the square indicates the current setting.

JReturning to the previous menu

Press the MENU button to return to the previous menu.
Press repeatedly to escape from the menu mode and
return to the projection.

JOperating procedure

1. Press F G to scroll to the required main menu item and
press the ENTER button to select.
The selected item is highlighted in orange and the sub-
menu is displayed.
See “Main menu and Sub-menu” on page 12.
2. Press F G to scroll to the required sub-menu item and
press I H or the ENTER button to adjust.
The selected item is called up and the other menu items
disappear from the screen. Called up item will be disappear
after 5 seconds and return to the menu mode.
If there is a lower level, the next level will be displayed.
You can reset some setting values to factory default by
pressing the DEFAULT button.
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by pressing I
H.
4. Press the MENU button to return to the previous menu.

Navigating through the menu

ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
0
CONTRAST
ADJUST

Current setting

Default

ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
0
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
GEOMETRY
MENU SELECT
CHANGE
AUTO
KEYSTONE
0
CONTRAST
ADJUST
NOTE:
• See “INITIALIZE” on page 31 to reset the settings.