SIGNAL LIST
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and
SIGNAL LIST and SUB MEMORY LIST
You can register a input signal as a SIGNAL LIST data, and several sets of adjusted settings for the signal as SUB MEMORY LIST data.
NOTE:
•You can register data up to 96 in total number of the signal data and any corresponding sub memory data.
•The names of the registered data are automatically determined by the input signals and memory numbers.
•If a menu is being displayed, the new signals will be registered at the instant they are input.
Managing the list and the registered data
Registering a signal to the list
When a new format input signal is applied to the projector, press the MENU button to register to the
SIGNAL LIST.
NOTE:
•The memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in the unused memory with the lowest number. If all the memories are used, the data of the old signals is overwritten in sequence.
•When a new input signal is applied while the menu is displayed, the signal will be registered to the list.
Displaying the signal list and the status
1.Select SIGNAL LIST in the main menu.
2.Press the ENTER button.
Display the REGISTERED SIGNAL LIST.
3.Select the required signal data.
4.Press the ENTER button.
Displays the REGISTERED SIGNAL STATUS.
NAME | Input signal name |
MEMORY NO. | Location address of registered data |
INPUT | Connected input terminal |
fH | Horizontal frequency |
fV | Vertical frequency |
SYNC.STATE | Polarity synchronisation |
|
|
Renaming a registered data
You can rename the automatically determined registered signal data.
1.Display the REGISTERED SIGNAL LIST and select the required signal data.
2.Press the ENTER button.
Displays the REGISTERED SIGNAL STATUS of the signal.
3.Press the ENTER button.
Displays the character list.
4.Select the required character by pressing F G I H and press the ENTER button.
Repeat until complete the name.
You can enter the characters up to 16.
5.Select OK and press the ENTER button.
Displays the REGISTERED SIGNAL STATUS with NAME renamed.
Select CANCEL and press the ENTER button to return to the REGISTERED SIGNAL STATUS without any change.
Deleting a registered data
You can delete a registered data from the REGISTERED
SIGNAL LIST.
1.Display the REGISTERED SIGNAL LIST and select the required signal data.
2.Press the DEFAULT button.
Displays the REGISTERED SIGNAL STATUS of the signal for confirmation to delete.
Settings
3. Press the ENTER button.
Displays REGISTERED SIGNAL LIST and confirm the data is deleted.
Press the MENU button to cancel and return to the REGISTERED SIGNAL LIST without any change.
ENGLISH - 33
