PICTURE menu

Remote control

See “Navigating through the menu” on page 15. See “Main menu and Sub-menu” on page 12.

COLOR

You can adjust the colour saturation of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

ILighter

H Darker

Setting range: -31 to +31

Settings

PICTURE MODE

Depending on the projection environment, you can use these preset parameter settings to optimise image projection. Press I H to cycle through the options.

STANDARD

Setting for a general image

CINEMA

Setting for a cinema type movie

NATURAL

Reproduces the original colour of the

image

 

DYNAMIC

Bright and sharp setting

GRAPHIC

Setting for image from computers

NOTE:

Factory default is STANDARD for moving images and GRAPHIC for RGB system.

CONTRAST

You can adjust the contrast of the projected image. Adjust the BRIGHTNESS in advance if necessary.

Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

ILower

H Higher

Setting range: -31 to +31

BRIGHTNESS

You can adjust the brightness of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

IDarker

H Brighter

Setting range: -31 to +31

TINT

You can adjust the skin tone in the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

IMore reddish

HMore greenish

Setting range: -31 to +31

COLOR TEMPERATURE

You can adjust the white balance of the projected image. Select the required option and press I, H or the ENTER button to call up the bar scale.

DEFAULT

Balanced white

USER

More detailed adjustment

MIDDLE

More reddish

HIGH

More bluish

Adjusting more detailed white balance

You can adjust white balance of RGB individually in high and low level.

1.Select USER and press the ENTER button.

2.Select WHITE BALANCE HIGH or WHITE BALANCE LOW, and call up the scale bars by pressing I, H or the ENTER button.

3.Press I H to adjust the value of each colour. Setting range

WHITE BALANCE HIGH: 0 to 255 (Default: 255)

WHITE BALANCE LOW: 0 to 63 (Default: 32)

NOTE:

With excessive unbalanced adjustment, such as extremely high with extremely low setting, all the colours may be displayed abnormally. Press the DEFAULT button to reset the selected item to the default setting.

Adjust COLOR TEMPERATURE with signal image. Internal test pattern is not for COLOR TEMPERATURE adjustment.

ENGLISH - 16

Page 16
Image 16
Panasonic TQBJ0299-3 manual Picture menu