Panasonic TQBJ0299-3 Technical Information

ENGLISH - 38

Appendix

Technical Information

You can control the projector from a computer with web browser, for adjusting the menu settings, displaying status

of the projector and transmission of E-mail messages if there is a problem with the projector.

Network connection

NOTE:

• A LAN cable is required to use the network function. A cross cable is required when connecting directly to a computer.

Straight cables are used when connecting through a switch or router.

• A web browser is required to use this function. Make sure that a web browser is available in the system.

• Use Microsoft Windows 98SE/Me/NT4.0/2000/XP/Vista for the OS of your personal computer.

• The Web browser should be Internet Explorer 6.0 or newer.

• To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail feature is

available in your system.

• Use a straight insulated LAN cable which supports category 5 or above.

• The length of LAN cable must be 100 m or shorter.

LAN terminal

NOTE:

• If the LAN terminal is touched by electrostatically charged hands or body, failure may be caused by the discharge of static

electricity. Be careful not to touch metallic part of LAN terminal or LAN cable.

• Connect indoor equipment to the LAN.

Computer Projector

LAN switch LAN cable (straight)LAN cable (straight)

LAN terminal (10BASE-T/100BASE-TX)

Connecting LAN cable.

LAN LINK/ACT lamp (green)

Lights when a LAN cable is connected and flashes when signals are being received or sent.

LAN 10/100 lamp (yellow)

Lights when a 100BASE-TX connection is established.

Contents

Main E Getting Started Settings Appendix Index .......................................................................... 50 Contents Setting up.....................................................................3 Connections ..............................................................10 Menu Navigation .......................................................12 PICTURE menu..........................................................16 Setting up Screen Screen size and throw distance Projected image Shown as 16:10 JProjection distance by projection lens QPT-DZ6710/PT-DZ6700 16:9 (Unit: m) 16:10 (Unit: m) QPT-DW6300 16:10 (Unit: m) 16:9 (Unit: m) QPT-D6000/PT-D5000 16:10 (Unit: m) 16:9 (Unit: m) JCalculation formulas for projection distance by lens types PT-DZ6710/PT-DZ6700 PT-DW6300 PT-D6000/PT-D5000 E Geometric adjustment E Front leg adjusters and throwing angle Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly. E Connections Before connection to the projector Pin assignments and signal names JS-VIDEO IN JRGB2 IN JDVI-D IN E Connecting example: Computers Connecting example: AV equipment E Menu Navigation DISPLAY LANGUAGE POSITION PICTURE ADVANCED MENU DISPLAY OPTION PROJECTOR SETUP TEST PATTERN SIGNAL LIST page 33 SECURITY NETWORK E JDisplaying the main menu See INITIALIZE on page 31 to reset the settings. 4. Press the MENU button to return to the previous menu. Press the MENU button to display the main menu. PICTURE menu QAdjusting more detailed white balance PICTURE MODE CONTRAST BRIGHTNESS E WHITE GAIN SYSTEM DAYLIGHT VIEW SHARPNESS NOISE REDUCTION POSITION menu JAspect ratio options QDEFAULT QVID AUTO QS1 AUTO E JMenu items displaying pattern depends on signals QWhen ASPECT setting is DEFAULT QWhen ASPECT setting is THROUGH QWhen ASPECT setting is others QGEOMETRY:KEYSTONE Select KEYSTONE and press the ENTER button to display the options. QGEOMETRY:CURVED Select CURVED and press the ENTER button to display the options. E KEYSTONE E ADVANCED MENU QSetting range DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION E QAdjusting EDGE BLENDING QAdjusting with colour markers QSelecting gamma level EDGE BLENDING E QAdjusting brightness around borderline of the image area RASTER POSITION E DISPLAY OPTION menu You can switch the contrast mode for operating environment. JSCREEN FORMAT JSCREEN POSITION You can change the displaying position of the projecting area. Press I H to adjust the value. E You can prevent the display of waning messages. JDVI EDID You can switch the EDID setting and signal level for variable DVI signals. JDVI SIGNAL LEVEL E BACK COLOR STARTUP LOGO FREEZE SIDE BY SIDE E PROJECTOR SETUP menu PROJECTOR ID INSTALLATION HIGH ALTITUDE MODE COOLING CONDITION E You can select the electrical consumption while in standby mode. This sets the communication parameters at the serial terminals. You can customise the REMOTE 2 IN terminal function. LAMP SELECT E You can see the status of the projector about the following items. STATUS FILTER COUNTER RESET NO SIGNAL SHUT-OFF E DATE AND TIME SERVICE PASSWORD LOAD ALL USERS DATA SAVE ALL USERS DATA TEST PATTERN TEST PATTERN SIGNAL LIST JSIGNAL LIST and SUB MEMORY LIST JManaging the list and the registered data QRegistering a signal to the list QDisplaying the signal list and the status SIGNAL LIST JManaging the sub memory list QRegistering the current settings to the list QDisplaying the sub memory list and restoring the settings QDeleting a sub memory data SECURITY menu JEntering the SECURITY menu QAfter you change the password SECURITY PASSWORD SECURITY PASSWORD CHANGE E JCONTROL PANEL JREMOTE CONTROLLER MENU LOCK MENU LOCK PASSWORD NETWORK menu NETWORK STATUS You can display the current network status of the projector. Press the ENTER button to display. NETWORK SETUP NETWORK CONTROL Technical Information Network connection LAN terminal E JProjector Control Window JChange password QAdministrator mode Accessing with the web browser JProjector Control QBasic control Click the Basic control tab on the top. QDetail control JDetailed set up QNetwork config Click the Adjust clock tag on the top. QAdjust clock QPing test QE-mail set up Click the E-mail set up tag on the top. When all options are filled, click Submit. Error report sample E-mail report sample JSTATUS QProjector status Click (Detail) Click the Projector status tab on the top. Error information E JControl commands JPJLink security authorization PJLinkTMprotocol E See RS-232C on page 29. JConnection QSingle projector QMultiple projectors JBasic format JCable specifications (When connected to a computer) JControl commands E Projector set up in a meeting room Control panel located in a different room JPin assignments and control REMOTE 2 IN terminal E (PT-DZ6710/PT-DZ6700/PT-DW6300 only) Restoring the MENU LOCK PASSWORD to default QSide by Side function signal combination table QMovie signals Page Index Index