Panasonic TQBJ0299-3 E, Connecting example: Computers, Connecting example: AV equipment

Getting Started
Connections
ENGLISH - 11
JConnecting with VIDEO IN/S-VIDEO IN
Connecting example: Computers
NOTE:
• For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating
instructions that is provided with the projector.
• If your computer has the resume feature (last memory), the computer may not function properly until the resume capability
is disabled.
• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.
• When using DVI-D input, EDID settings may be required for the connected device. See “DVI-D IN” on page 26.
Connecting example: AV equipment
NOTE:
• When connecting with a VCR, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the
projector and the VCR.
• If non-standard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the
projector and the VCR.
• The DVI-D signals input terminal supports only a single link.
• The HDMI - DVI-D conversion cable is required to connect an HDMI compliant device.
• It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D compliant device, but with some devices the
images may not appear or other problems may be encountered in operation.
Control Computers
Control
Projector 1 Projector 2
Control VCR
HDMI equipped
DVD player (HDCP)