Settings
PROJECTOR SETUP menu
ENGLISH - 30

You can see the status of the projector about the following

items.

* Not available for PT-D5000.

After you replaced the Auto Cleaning Filter (ACF),

REMAINING FILTER of STATUS need to be reset to "0".

1. Press the ENTER button.

2. Select OK by pressing I, then press the ENTER button.

3. The REMAINING FILTER of STATUS will be reset to

“0”.

Display the STATUS and confirm the figure.

You can set the timer to switch off the power of the projector

after a certain period of time automatically when no signal is

detected. Press I H to select the required period from 10 to

90 minutes at intervals of 10 minutes.

You can assign a certain menu function to the FUNCTION

button as shortcut. Press I H to select the required menu

option, and the ENTER button.

STATUS

Items Description
INPUT Displays the input selection state.
NAME Displays the input signal name.
SIGNAL FREQUENCY Displays the frequency of the input
signal.
PROJECTOR RUNTIME Displays the projector runtime.
LAMP1 Displays the lighting time of LAMP1.
LAMP2 Displays the lighting time of LAMP2.
INTAKE AIR TEMP. Displays the intake air temperature of
the projector.
OPTICS MODULE TEMP. Displays the temperature inside the
projector.
AROUND LAMP TEMP. Displays the temperature around the
lamp of the projector.
REMAINING FILTER Displays the filter runtime.
QUANTITY Displays the filter remaining quantity.
PROJECTOR TYPE Displays type of projector.
SERIAL NUMBER Displays the serial number of the
projector.
MAIN VERSION Displays the main version of the
firmware of the projector unit.
SUB VERSION Displays the sub version of the
firmware of the projector unit.
NETWORK VERSION Displays the network version of the
projector unit.
ON COUNT
POWER ON TIMES Displays the number of times the
power has been tuned on.
LAMP1 ON Displays the number of times LAMP1
has been lit.
LAMP2 ON Displays the number of times LAMP2
has been lit.
SHUTTER Displays the number of times the
shutter function has been used.
LAMP1 LOW * Displays the LAMP1 lighting time with
LOW setting in LAMP POWER.
HIGH * Displays the LAMP1 lighting time with
HIGH setting in LAMP POWER.
LAMP2 LOW * Displays the LAMP2 lighting time with
LOW setting in LAMP POWER.
HIGH * Displays the LAMP2 lighting time with
HIGH setting in LAMP POWER.
NUMBER OF ENTRY
SIGNAL
Displays the number of registered
signals.
REMOTE2 STATUS Displays REMOTE 2 IN control status.

FILTER COUNTER RESET

NOTE:
• See “Replacing the Auto Cleaning Filter (ACF)” in the
operating instructions booklet that is provided with the
projector.

NO SIGNAL SHUT-OFF

DISABLE
FG FG
10 MIN. 90 MIN.
FG FG
20 MIN. 80 MIN.
FG FG
30 MIN. 70 MIN.
FG FG
40 MIN. 60 MIN.
FG FG
50 MIN.

FUNCTION BUTTON

Options Functions Refer
DISABLE Deactivate the FUNCTION
button. -
SUB MEMORY LIST Displays the assigned SUB
MEMORY LIST.34
SYSTEM SELECTOR Switches SYSTEM SELECTOR
options. 17
SYSTEM DAYLIGHT
VIEW
Switches the SYSTEM
DAYLIGHT VIEW setting. 17
FREEZE Freezes the image. 27
SIDE BY SIDE Start the SIDE BY SIDE mode. 27