PICTURE menu
WHITE GAIN
You can adjust the brightness of white area of the image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.
IMore natural white
H Whiter
Setting range: 0 to +10
NOISE REDUCTION
You can select the automatic noise reduction system strength. Press I H to cycle through the options.
OFF | Deactive |
1Low
2Middle
3High
SYSTEM DAYLIGHT VIEW
You can keep the projected image bright and vivid even in well- lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight. Press I H to cycle through the options.
OFF | Deactive |
1Low
2Middle
3High
SHARPNESS
You can adjust the sharpness of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.
ILess sharp
HMore sharp
Setting range: 0 to +15
AI
You can switch on/off the auto iris control system. Press I H to switch between ON or OFF.
ON | Active |
OFF | Deactive |
SYSTEM SELECTOR
When the input signal is changed, the projector detects the colour system and selects the matched setting automatically, or you can select manually. Press I H to cycle through the options.
AUTO HNTSC HNTSC 4.43 HPAL HPAL-M HPAL-N HSECAM HPAL60
•AUTO is usually recommended.
•Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL-
RGB 1 IN/RGB 2 IN terminal
480i/576i/576p signals | RGB HYCBCR |
VGA60/480p signals: | VGA60 H480p H480pRGB |
Other signals | RGB HYPBPR |
•See "List of compatible signals" in the Operating Instructions that provided with the projector.
SDI terminal
AUTO H 1080⁄60i H 1035⁄60i H 720⁄60p H 1080⁄24p H 1080⁄50i
H1080⁄30p H 1080⁄25p H 1080⁄24sF H 720⁄50p H 480i H 576i
Settings
ENGLISH - 17
