ENGLISH - 25
Settings

DISPLAY OPTION menu

(Not available for PT-D5000)
When multiple projectors are used simultaneously, you can
adjust the difference of the colours. Press I H to cycle
through the options.
You can adjust 6 colours and register the result for each of 4
types of signals, VIDEO, S-VIDEO, RGB and YPBPR/YCBCR.
(Not available for PT-D5000)
You can switch the contrast mode for operating environment.

JSCREEN FORMAT

Select the required screen format by pressing I H. The
SCREEN FORMAT setting will affect on the ASPECT
setting. See “ASPECT” on page 18.

JSCREEN POSITION

You can change the displaying position of the projecting
area. Press I H to adjust the value.
You can turn ON/OFF automatically detecting system of the
AUTO SETUP feature.

COLOR MATCHING

OFF Deactive.
3 COLORS
Adjusting RGB gain of RED, GREEN, BLUE
and WHITE. Press I H to change the value
and switch ON/OFF the AUTO TEST
PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)
7 COLORS
Adjusting RGB gain of RED, GREEN,
BLUE, CYAN, MAGENTA, YELLOW and
WHITE. Press I H to change the value and
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)
MEASURED
Adjusting colours based on measured
values using colorimeter. Input measured
result in MEASURED DATA, and adjust in
TARGET DATA. Press I H to change the
value and switch ON/OFF the AUTO TEST
PATTERN.
PICTURE MODE in PICTURE menu
need to be set to DYNAMIC for using
colorimeter.
NOTE:
• If the TARGET DATA is outside the colour range of the
projector, the colours will not be projected correctly.
• When each colour option is selected while AUTO TEST
PATTERN is activated, its one colour pattern will be displayed.
• Adjusting red gain of red colour changes its luminance, and
likewise blue gain of blue and green gain of green.
•COLOR MATCHING adjustment should be carried out by a
person who is familiar with the projector or by a service person
because a high level of skill is required to make successful
adjustment.
• Press the DEFAULT button to restore the factory default
settings.
•AI, COLOR CORRECTION and COLOR TEMPERATURE are
not available with COLOR MATCHING.
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and Sub-menu” on page 12.

COLOR CORRECTION

OFF Deactive
USER
Adjust 6 colours, RED, GREEN,
BLUE, CYAN, MAGENTA and
YELLOW.

CONTRAST MODE

NORMAL Maximum brightness
HIGH Maximum contrast

SCREEN SETTING

PT-DZ6710/PT-DZ6700 16:10*1 H 16:9 H 4:3
*1. SCREEN POSITION is not available.
PT-DW6300 16:10*1 H 16:9
PT-D6000/PT-D5000 4:3*1 H 16:9
PT-DZ6710/PT-DZ6700
Setting range:
16:10 Not available.
16:9 -60 to +60
4:3 -160 to +160
PT-DW6300
Setting range:
16:10 Not available.
16:9 -40 to +40
PT-D6000/PT-D5000
Setting range:
4:3 Not available.
16:9 -96 to +96

AUTO SIGNAL

OFF
Only when the AUTO SETUP button is
pressed, the projected image position
will be adjusted.
ON
When the projector detects a
COMPUTER or DVI signal, adjust the
projected image position automatically.