Panasonic WJ-MPU955A Digital Video Encoder Devices, Connect with CPU, Setup from Admin Console

■Digital Video Encoder Devices

Digital video encoder devices refer to MPEG2 video encoder devices (WJ-GXE900). They connect to the CPU through an Ethernet switching hub in an IP based network. Refer to the Operating Instructions of MPEG2 encoder/MPEG2 decoder.

●Connect with CPU

The video encoders connect with the CPU through its Ethernet port and one or more switching hub units. The system can sup- port up to 256 video encoder devices.

		TRIGGER OUT	ALARM IN	RESET
	ON OFF					POWER
100BASE-TX TERM		RS-4854 3 2 1 G 4 3 2 1 GG V + – G				ON	OFF
4	3	2	1
		VIDEO IN		VIDEO OUT	AUDIO IN	SIGNAL	GND

WJ-GXE900

		192.168.200.200
Switching HUB	10BASE-T/100BASE-TX		SERIAL	POWER
				ON
				SIGNAL GND
				OFF
	SYSTEM	SYSTEM OTHER	2	1
	CONTROLLER	DEVICE
				AC IN

WJ-MPU955A

●Setup from Admin Console

In order to be added to the GX System, an encoder device must be entered into the digital device database. In the admin con- sole, select Switch Nodes from the Domain menu, select Digital (GX) from the sub-menu that appears, and then enter the infor- mation for the encoder device. Please note, you need to know the Rotary Switch (SW1 A, B, C) readings from the encoder device. Rotary Switch settings must be unique for all the encoder and decoder devices. Refer to the Admin Console User's Guide.

30