To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but- ton while holding down the SHIFT button, all alarms will be armed or disarmed.
MON |
| CAM |
0123 | ALL Arm | 00512 |
MON |
| CAM |
0123 | ALLDisarm 00512 |
Note: To arm or disarm an alarm, activate Allow Disarm for the alarm. (Refer to the Admin Console User's Guide for details.)
■To Operate Alarm-related
Camera (ACK)
You can operate the camera associated with the alarm action as follows:
1.Perform Step 1 and 2 of Alarm Selection.
2.Enter a desired alarm action number by pressing the numeric buttons.
Note: If you skip this step, Alarm Action #0 will be specified.
MON | 9 | CAM |
0123 | Active | 00512 |
3.Press the ACK button.
"Ack:nn" will appear on the LCD.
MON | Alarm00001 | CAM |
0123 | Ack:9 | 00512 |
4.Control the cameras with the system controller. (Refer to p. 58 Camera Site Accessories Control.)
Note: To select another alarm, press the ALARM/ALM SUSPEND button. The ACK status will be canceled (cancelled). Then, enter the alarm action number by pressing the numeric buttons, and press the ALARM/ALM SUSPEND button again.
■To Cancel Alarms
1.Perform Step 1 to 2 of p. 64 Alarm Selection.
2.Press the ALM RESET/ALM ALL RESET button to reset the alarm. "Reset" will be displayed on the LCD.
MON Alarm00001 CAM
0123 Reset 00512
Notes:
•To reset all the alarms at a time, press the ALM RESET/ALM ALL RESET button while holding down the SHIFT button.
MON Alarm00001 CAM
0123 ALL Reset 00512
•After the alarm is deactivated, "Armed" or "Cleared" will be displayed on the LCD.
MON Alarm00001 CAM
0123 Armed 00512
MON Alarm00001 CAM
0123 Cleared 00512
65