Main Features
■Operator Functions
●Operator Area Changes
The system can be divided into multiple areas (up to 64), and an operator can change from one area to another if they have the necessary permission.
■Video Camera Functions
●Camera Control
The system provides operators with the camera control functions. The supported functions are: pan, tilt, zoom, focus, and iris.
●Operator Log On and Off
Operators are assigned a user ID and password by a sys- tem administrator. A user ID and password are required for any operator to log on to the system. System administrators can specify to automatically log operators off if there is no activity for a
●Operator Class
The system allows administrators to define operator classes with up to 25 different privileges, and then assign each operator to one of the defined classes. The privileges are: permission override, area change, alarm select, all alarm reset, alarm acknowledge and reset, all alarm arm and dis- arm, alarm arm and disarm, camera select, camera posi- tion, camera preset programming, camera menu on and off, camera function enable (not currently supported), cam- era receiver, camera setup data, camera lock, camera lock override, tour sequence, all sequence stop (not currently supported), sequence controller programming, monitor select, monitor lock,
●Operator Priority
The system administrator can assign a priority to each operator. When two operators compete for system resources, only the operator with the higher priority gets the resources.
●Camera Operation
The system provides operators with the following camera operation functions:
•Camera menu control
•Camera preset call and programming
•Camera receiver control
■Video Recorder Functions
●Recorder Basic Operations
The system provides operators with the following video recorder functions:
•Recording
•Playback, pause, and stop
•
•Video input channel selection
•Multiscreen segment switching
●Recorder Search Functions
The system provides operators with the following recorder search functions:
•
•Recording event search (Thumbnail or list search)
•VMD search (Video motion detection search)
■Video Switch and Video
Routing
This function allows operators to switch video from one video source to another, if the permission is granted. For multiple operators competing for the same resource, it only allows the highest priority operator to perform this function. The next highest priority operator gains control when the highest priority operator releases the resource.
●Recorder Menu Functions
The system provides operators with the following recorder menu functions:
•Recorder setup menu
•Disk selection menu
•A – B repeat playback menu
•Filter cancellation menu
●Recorder Instant Playback Operation
The system provides operators with the instant playback operation for a selected global camera.
14