Panasonic WJ-MPU955A LCD Display Descriptions, Default Status LCD Display After Login, Blinking

LCD Display Descriptions

■Default Status (LCD Display After Login)

MON		CAM
0032		>00512
	Unit:01

qMonitor number

The number of connected monitor is displayed.

wUnit number/Status

The number of connected site will be displayed.

eCamera number

The number of selected camera is displayed.

rInput number/Recorder number/Status

The numeric input, selected recorder number, or status is displayed.

■Blinking

In this document, grayed (greyed) areas on the LCD illus- trations mean blinking.

			MON
		∗		Prohibit	CAM
	0001			Unit:01	00001
Blinking

■Messages Displayed on the

LCD

The following are examples of LCD display after login.

Note: Some parts of LCD displays, described on this docu- ment, may differ from the actual status.

●Invalid

MON	Invalid	CAM
0001	Unit:01	00001

This message is displayed in the following circumstances.

•When you have entered a wrong user ID or password, etc.

•When you have entered a camera number or monitor number, etc. that is not existing.

●Busy

•When a selected monitor is controlled by a higher-level user, "∗" blinks on the LCD. (You cannot control the

monitor.)

•When a selected camera is controlled by a higher-level user, "∗" blinks on the LCD. (You cannot control the

camera.)

•To cancel the Busy status, select another monitor, cam- era, or wait until "∗" goes out.

∗MON Prohibit CAM 0001 Unit:01 00001

"Busy" status is activated for a monitor.

MON Prohibit CAM∗

0001 Unit:01 00001

"Busy" status is activated for a camera.

●Prohibit (Prohibited)

MON Prohibit CAM

0001 Unit:01 00001

•When you have tried an operation not authorized by the system unit, "Prohibited" is displayed on the LCD.

•When you have forgotten to select a monitor before selecting a camera, "Prohibited" is displayed on the LCD.

•After a few seconds, the LCD display will return to the default status.

54