Running Sequence
■Tour Sequence
The following functions are available if a Tour Sequence has been previously configured through the admin console. Any Tour Sequence can be assigned to any monitors.
1.Select the desired monitor. (Refer to p. 56 Monitor Selection.)
2.To select the desired Tour Sequence number, press the numeric buttons.
MON | 1 | CAM |
0123 | Unit:01 | 00512 |
Note: When you have selected a wrong number, press the CLEAR button to clear the numeric input.
3.Press the TOUR SEQ/GROUP SEQ button. The Tour Sequence will run in forward direction on the active monitor, and the Tour Sequence number with "R" (Running) sign is displayed on the active monitor.
MON A001T0001R CAM
0123 Unit:01 00512
Note: The messages on the LCD indicate the following.
Annn: Area No.
Tnnnn: Tour Sequence No.
R: Running
4.To pause the sequence, press the SEQ PAUSE/SEQ STOP button.
The "P" (Pausing) sign will be displayed beside the Tour Sequence number area on the active monitor, and "P" will appear beside the Tour Sequence number.
MON A001T0001P CAM
0123 Unit:01 00512
Notes:
•To switch to the next sequence step, press the + button during sequence pause.
•To switch to the previous sequence step, press the
– button during sequence pause.
•To resume the sequence, press the TOUR SEQ/GROUP SEQ again.
5.To return to spot monitoring, press the SEQ PAUSE/SEQ STOP button while holding down the SHIFT button.
Note: You can also return to spot monitoring by select- ing a camera.
■Group Sequence
The following function is available only if a Group Sequence has been previously established through the admin console. A Group Sequence determines the assignment of monitors and cameras.
1.Press the numeric buttons to select a desired Group Sequence number.
MON | 1 | CAM |
0123 | Unit:01 | 00512 |
Note: When you have selected a wrong number, press the CLEAR button to clear the numeric input.
2.Press the TOUR SEQ/GROUP SEQ button while holding down the SHIFT button. The Group Sequence will run in forward direction on the assigned monitors, and the Group Sequence number with "R" (Running) sign is dis- played on each monitor.
MON A001G0001R CAM
0123 Unit:01 00512
Notes:
•The messages on the LCD indicate the following. Annn: Area No.
Gnnnn: Group Sequence No.
R:Running
•When you select another monitor and starts a group sequence, the Group Sequence number will not be displayed on the LCD.
3.To pause the sequence, select one of the monitors that are being run on the selected group sequence. Then press the SEQ PAUSE/SEQ STOP button.
The "P" (Pausing) sign will be displayed beside the Group Sequence number area on the active monitor.
MON A001G0001P CAM
0123 Unit:01 00512
Notes:
•To switch to the next sequence step, press the + button during sequence pause.
•To switch to the previous sequence step, press the
– button during sequence pause.
4.To return to spot monitoring, select one of the monitors that are being run on the selected group sequence. Then, press the SEQ PAUSE/SEQ STOP button while holding down the SHIFT button.
62
