■Alarm Status Table
The table shows the alarm statuses.
1.Select a desired monitor. (Refer to p. 56 Monitor Selection.)
2.Display "AlmStat" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)
AlmStat: 008
On Off Blk
3.Select a desired function by pressing one of the F1 to F3 buttons.
Available buttons and functions F1: On
Opens the ALARM STATUS table.
F2: Off
Closes the ALARM STATUS table.
F3: Blk
Changes the monitor background beween camera images and black picture.
| ALARM STATUS | PG | |
ALM | STATE |
| NAME |
1 | DISARMED | FRONT DOOR | |
1 | ARMED | BACK DOOR | |
1 | ACTIVE |
| – |
1 | ACKED |
| – |
1 | CLEARED |
| – |
1 | RESET |
| – |
NAME: Alarm text
(Refer to p. 66 for other columns on the table.)
4.To display the next page, press the + button.
To display the previous page, press the – button.
Notes:
•To display the first page of table, press the + but- ton while holding down the SHIFT button.
•To display the last page of table, press the – button while holding down the SHIFT button.
5.To exit the ALARM STATUS table, perform one of the following.
•Select a camera. (Refer to p. 56 Camera Selection.)
•Press F2, then press the MON(ESC) button.
•Press F2, then press the EXIT button.
■Video Loss Status Table
The table shows the video loss detection statuses.
1.Select a desired monitor. (Refer to p. 56 Monitor Selection.)
2.Display "VL Stat" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)
VL Stat: | 009 |
On Off | Blk |
3.Select a desired function by pressing one of the F1 to F3 buttons.
Available buttons and functions F1: On
Opens the VIDEO LOSS STATUS table.
F2: Off
Closes the VIDEO LOSS STATUS table.
F3: Blk
Changes the monitor background beween camera images and black picture.
| VIDEO LOSS STATUS | PG | ||
CAM PORT | NODE | STATUS | LOCATION | |
6400 | 999 | SX | ABV/IN 1234567890 | |
6400 | 999 | SX | ABV/OUT 1234567890 | |
6400 | 999 | SX | BLW/IN 1234567890 | |
6400 | 999 | SX | BLW/OUT 1234567890 |
CAM: Logical camera number
PORT#: Video input port number
NODE: Video switch node type
STATUS:
ABV/IN: Video level is above normal and in sync.
BLW/IN: Video level is below normal and in sync.
ABV/OUT: Video level is above normal and out of sync.
BLW/OUT: Video level is below normal and out of sync.
LOCATION: Logical cage number that the port belongs to.
4.To display the next page, press the + button.
To display the previous page, press the – button.
Notes:
•To display the first page of table, press the + but- ton while holding down the SHIFT button.
•To display the last page of table, press the – button while holding down the SHIFT button.
5.To exit the VIDEO LOSS table, perform either of the fol- lowing.
•Select a camera. (Refer to p. 56 Camera Selection.)
•Press F2, then press the MON(ESC) button.
•Press F2, then press the EXIT button.
80