Panasonic WJ-MPU955A manual Area Change, Operator ID, Controller ID, System Version

4.To display the next page, press the + button.

To display the previous page, press the – button.

Notes:

•To display the first page of table, press the + but- ton while holding down the SHIFT button.

•To display the last page of table, press the – button while holding down the SHIFT button.

5.To exit the VIDEO LOSS HISTORY table, perform either of the following.

•Select a camera. (Refer to p. 56 Camera Selection.)

•Press the MON(ESC) button.

•Press the EXIT button.

■Area Change

Note: The following function is available only if the assign- ments of monitor surveillance areas has been estab- lished through admin console. (Refer to the Admin Console User's Guide.)

1.Display "Area No" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

Area	No:1	012
Set

2.Select an area number by pressing the numeric but- tons.

Area	No:9	012
Set

Note: If you have selected an area not assigned through the admin console, operations will become unavailable. In this case, log out, and then log into the system again. (Refer to p. 55 Login and Logout.)

3. Press the F1 button. The area will be changed.

■Operator ID

You can check your operator ID as follows.

Display "Ope ID" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

Your operator ID will be displayed on the LCD.

Ope ID :100 013

■Controller ID

You can check your System Controller ID as follows.

Display "Cnt ID" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

Your System Controller ID will be displayed on the LCD.

Cnt ID :001 014

■System Version

You can check the system version of CPU as follows.

Display "Ver" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

The system version of CPU will be displayed on the LCD.

Ver: 3.2.0.0 015

82