Panasonic WJ-MPU955A Patrol Learn, OSD Control, Group Preset, Digital Output, Start, Stop, GrpPre

■Patrol Learn

1.Select a desired monitor and camera. (Refer to p. 56 Monitor Selection and Camera Selection.)

2.Display "Patrol" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

■OSD Control

1.Select a desired monitor. (Refer to p. 56 Monitor Selection.)

2.Display "OSD" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

Patrol	:	004
Start	Stop

3.Press the F1 (Start) button. The patrol learn setup will start.

4.Perform desired camera operations by moving the 3D joystick or zoom wheel controller, etc.

The following controls are available for patrol learn.

•Panning/Tilting (3D joystick)

•Iris control (IRIS OPEN/CLOSE buttons)

•Focus control (FOCUS FAR/NEAR buttons)

•Zoom control (Zoom wheel controller)

Note: The available total time of patrol learn differs depending on cameras. When the time is over, the patrol learn setup will automatically stop.

5.To quit the patrol learn setup, press the F2 (Stop) but- ton.

OSD : 006

T&D Cam Gen Mon

3.Select a desired function by pressing one of the F1 to F4 buttons.

Available buttons and functions F1: T&D

Displays or hides the clock (time and date) display.

F2: Cam

Displays or hides the camera ID (camera number and title) display.

F3: Gen

Displays or hides the general status display.

F4: Mon

Displays or hides the moitor status display.

Note: Refer to the illustrations in p. 63 for each OSD item.

■Group Preset

Note: This function is available only when Group Preset set- ting has been established through the admin console. (Refer to the Admin Console User's Guide.)

A Group Preset determines which monitor is to be assigned to which camera. Therefore, monitor selection is not required.

1.Display "GrpPre" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

GrpPre :	005
Set

2.Select a desired Group Preset number by pressing the numeric buttons.

3.Press the F1 (Set) or CAM(SET) button to activate a selected Group Preset function.

The preset position of assigned cameras will be dis- played simultaneously on the assigned monitors.

■Digital Output

Note: This function is available only when Digital Output setting has been established through the admin con- sole. (Refer to the Admin Console User's Guide.)

1.Display "DigiOut" menu. (Refer to Step 1 of p. 77 To Recall Menu Functions.)

DigiOut: 007

Set

2.Select a Digital Output number by pressing the numer- ic buttons.

3.Press the F1 (Set) or CAM(SET) button. A one-shot pulse will be produced, and an assigned event will be activated.

Note: Digital Output does not support the restore func- tion.

79