Panasonic WJ-MPU955A manual Menu Function Details, Camera Setup, Auto Mode, BW Mode

Menu Function Details

■Camera Setup

Notes:

•The following function requires the use of cameras sup- porting this function.

•The details on the setup menu differ depending on camera models. Refer to WV-CU950/650 Operating Instructions and the Operating Instructions of camera for available controls on the camera setup menu.

1.Select a desired monitor. (Refer to p. 56 Monitor Selection.)

2.Display "CamMenu" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

CamMenu: 001

On 5Off Rst A.Rst

3.Select a desired function by pressing one of the F1 to F4 buttons.

Available buttons and functions F1: On

Opens the setup menu of selected camera.

F2: Off

Closes the setup menu of selected camera.

F3: Rst

•Displays the special menu.

•To restore the default camera position, move the

cursor to REFRESH on the camera setup menu by moving the 3D joystick. Then, press this button.

F4: A.Rst

To reset all the camera settings to the factory default, move the cursor to CAMERA RESET on the camera setup menu by moving the 3D joystick. Then, press this button.

Note: Depending on the camera model, "CAMERA RESET" is not displayed on the camera setup menu. In this case, the F4 button is unavailable.

■Auto Mode

1.Select a desired monitor and camera. (Refer to p. 56 Monitor Selection and Camera Selection.)

2.Display "Auto Mod" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

AutoMod: 002

Seq Sort Pan Patrol

3.Select a desired function by pressing one of the F1 to F4 buttons.

Available buttons and functions

F1: Seq

Activates the sequence mode.

F2: Sort

Activates the sort mode.

F3: Pan

Activates the auto pan mode.

F4: Patrol

Activates the patrol mode.

■BW Mode

1.Select a desired monitor and camera. (Refer to p. 56 Monitor Selection and Camera Selection.)

2.Display "BW Mode" menu. (Refer to Step 1 and 2 of p. 77 To Recall Menu Functions.)

BW Mode: 003

On Off Auto1 Auto2

3.Select a desired function by pressing one of the F1 to F4 buttons.

Available buttons and functions F1: On

Changes the camera image from color (colour) to black and white.

F2: Off

Changes the camera image from black and white to color (colour).

F3: Auto1

Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color (colour) mode if the picture is bright enough.)

F4: Auto2

Activates Auto 2 mode. (The camera detects the light source type to prevent malfunction. This setting is applicable when using a near-infrared light source in a dark place.)

78