●Disk Selection
You will specify a disk of recorder for search playback.
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2.Press the MENU button repeatedly repeatedly until "HD300 DiskSelect" appears on the LCD.
HD300 DiskSelect 301
3.Press one of the F1 to F4 buttons. The specified disk will be selected.
Available buttons and functions F1:
Specifies the normal or event recording area for play- back.
F2:
Specifies the copy area for playback.
F3: Cpy1
Specifies the external recording device connected to the COPY1 port of recorder.
F4: Cpy2
Specifies the external recording device connected to the COPY2 port of recorder.
MON (ESC)
Cancels search playback and recovers the default LCD status.
EXIT
Cancels search playback and recovers the default LCD status.
4.When you specify a disk, the search list display will appear on the active monitor, and "Search Mode" menu will appear on the LCD. Then, perform the search play- back operation. (Refer to p. 69 Search Playback.)
Search Mode
Thumb | Text Copy |
●A - B Repeat Playback
You can playback the recorded images repeatedly by specifying the start point (A) and end point (B).
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2.Press the MENU button repeatedly until "HD300 A – B repeat" appears on the LCD.
HD300
Start End | Cancel |
Note: To cancel the setting and exit "HD300 A – B repeat", press the MON (ESC) or EXIT button. The LCD display will return to the default status.
3.During playback, press the F1 button at the point you wish to start playback. The playback start point (A) will be set.
Note: To cancel the start point, press the F4 button.
4.Press the F2 button at the point you wish to end play- back. The playback end point (B) will be set, and the repeat playback will be performed between (A) and (B).
●Canceling Filters
During the filtering playback, the searching filter will be temporarily canceled (cancelled) or recovered.
Notes:
•This function is available only during filtering playback.
•You can change the ON/OFF setting during playback and playback pause.
1.Select the recorder. (Refer to p. 67 Recorder Selection.)
2.Press the MENU button repeatedly until "HD300 Listed" appears on the LCD.
HD300 | Listed | 303 |
On | Off |
|
3.Press the F2 button.
The searching filter will be canceled (cancelled), and "B" mark will light up beside "Off".
HD300 | Listed | 303 |
On | Off |
|
Notes:
•To recover the searching filter, press the F1 button. The searching filter will be recovered, and "B" mark will light up beside "On".
•To cancel the setting and exit "HD300 Listed", press the MON (ESC) or EXIT button. The LCD display will return to the default status.
76