Monitor Selection and Camera Selection
After the login procedure, the following operations are avail- able to control the system.
The operation begins with monitor selection. Then, the image of selected camera appears on the active monitor.
■Monitor Selection
1.Select the desired monitor number by pressing the numeric buttons. The entered number will appear on the LCD.
MON 123 | CAM |
Unit:01 |
|
2.Press the MON (ESC) button.
When the selected monitor number is correct, <" is dis- played.
MONCAM 0123<Unit:01
Note: To select the next or previous monitor number, press the + or – button.
■Camera Selection
1.Select the desired camera number by pressing the numeric buttons. The entered number will appear on the LCD.
MON 512 | CAM |
0123<Unit:01 |
|
2.Press the CAM (SET) button.
When the selected camera number is correct, >" is dis- played.
MONCAM
0123 Unit:01 >00512
Note: To select the next or previous camera number, press the + or – button.
■Monitor Lock
Monitor lock is the function to retain other operators' control of a monitor even after that operator has selected another monitor.
Note: This function will prevent operators with a lower prior- ity from gaining control of a monitor. However, opera- tors with a higher or the equal priority can gain the con- trol of monitor.
1.Select a desired monitor. (Refer to Monitor Selection.)
2.Press the MON LOCK/LOGOUT button. The monitor lock mode is activated, the monitor number with "L" sign is displayed on the active monitor, and "L" will appear beside "MON" on the LCD.
LMONCAM 0123 Unit:01 00512
Note: Every time you press the MON LOCK/LOGOUT button, the monitor lock mode will be activated or deactivated.
56
