• Opening the Setup Menu
Press and hold down 
for 2 seconds or more.
** CAM SET UP ** | Blinking | |||
CAMERA ID | OFF | ↵ |
| |
ALC/ELC |
| ALC | ↵ |
|
SHUTTER |
| OFF |
|
|
AGC |
| ON |
| |
SENS UP |
| OFF |
|
|
SYNC |
| INT |
|
|
WHITE BAL | ATW1 ↵ |
| ||
MOTION DET | OFF |
|
| |
LENS DRIVE | DC |
|
| |
END | SET UP DISABLE |
| ||
The CAM SET UP menu appears on the monitor as shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of menu items. If you decide not to make any changes after checking the current settings, move the cursor to
END at the start of the bottom line, and press 
to close the CAM SET UP menu and return to normal cam- era picture mode.
Note: If no button is pressed for 6 minutes while the CAM SET UP menu or any other menu is opened, the menu is automatically closed and the mode returns to the normal camera picture.
