8.Adjust the horizontal phase by pressing 
or 
. The adjustable range is 0 - 2.0µs.
9.Move the cursor to SC COARSE.
10.Press 
or 
to match the chroma phase of the camera’s video signal, when observed at the out- put of the Special Effect Generator (SEG) or Switcher, as closely as possible to the color of the original scene. (SC COARSE adjustment can be incremented in steps of 90 degrees (4 steps) by
pressing 
or 
.)
Note: After the fourth step, the adjustment returns to the first step.
1 (1 - - 4): 0 degrees
2 (1 - - 4): 90 degrees
3 (1 - - 4): 180 degrees
4 (1 - - 4): 270 degrees
11.Move the cursor to SC FINE.
12.Press 
or 
to match the color (hue) of the camera’s video signal, when observed at the out- put of the Special Effect Generator (SEG) or Switcher, as closely as possible to the color of the original scene.
The SC FINE adjustment has a range of 90 degrees of color shift.
Notes:
•When the “I” cursor reaches the “+” end, it jumps back to “− ” . At the same time, SC COARSE is incremented by one step to enable
a continuous adjustment. The reverse takes place when the “I” cursor reaches the “− ” end.
•When 
or 
is kept pressed for a second or more, the “I” cursor moves faster.
•For more accurate adjustment, supply both the original camera video output signal and the effect output video signal (program output video signal) of the special effects generator (SEG) to a vectorscope and compare the chro- ma phase of both signals.
•To reset SC COARSE and SC FINE to the val-
ues preset at the factory, press 
and 
simultaneously.
