Panasonic WV-CL924, WV-CL920 Shutter Speed Setting Shutter, Gain Control Setting AGC ON/OFF

3. Shutter Speed Setting (SHUTTER)

Note: When ELC is selected for ALC/ELC on the CAM SET UP menu, this item is not available.

You can select an electronic shutter speed of 1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, or 1/10 000 seconds.

** CAM SET UP **

CAMERA ID		OFF	↵
ALC/ELC		ALC	↵
SHUTTER		OFF
AGC		ON	(DNR-H)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1↵
MOTION DET		OFF
LENS DRIVE		DC
END	SET UP ENABLE

Move the cursor to the SHUTTER parameter and select the electronic shutter speed.

The preset values for SHUTTER (electronic shutter

speed) change by pressing or as follows:

OFF (1/60) 1/100 1/250 1/500

1/10 000 1/4 000 1/2 000 1/1 000

4. Gain Control Setting (AGC ON/OFF)

You can set the gain (brightness level portion of an image) to automatic level adjustment ON (DNR-H), ON (DNR-L) or fixed level (OFF).

	** CAM SET UP **
CAMERA ID		OFF	↵
ALC/ELC		ALC	↵
SHUTTER		OFF
AGC		ON (DNR-H)
SENS	UP	OFF
SYNC		INT
WHITE BAL		ATW1↵
MOTION DET		OFF
LENS	DRIVE	DC
END	SET UP ENABLE

Move the cursor to the AGC parameter and select auto- matic level adjustment ON (DNR-H), ON (DNR-L) or fixed level (OFF).

Notes:

•If ON (DNR-H) is selected for the AGC parameter, the noise reduction function is automatically acti- vated under low light conditions to reduce noise. In pictures containing a moving object, this may result in an afterimage.

•DNR-L is recommended for pictures containing a moving object that results in an afterimage. However, the noise slightly increases.

•DNR-H and DNR-L do not appear for the AGC parameter on the system controller setup menu.

-26-