Panasonic WV-CS854B Special 1 Menu Setting Special, Privacy Zone Privacy Zone

■Special 1 Menu Setting (SPECIAL 1)

●Privacy Zone (PRIVACY ZONE)

Up to 8 unwanted zones can be masked on the monitor screen.

1.Move the cursor to PRIVACY ZONE and select ON or OFF with the joystick. Press the CAM (SET) key to display the ZONE NUMBER setting menu.

** SPECIAL	1 **
PRIVACY ZONE	OFF
PROPO.P/T	ON
AREA TITLE	ON(USER)
PATROL	STOP
ALARM IN/OUT
CLEANING	OFF
EL-ZOOM	ON
PRESET ALM	OFF
IMAGE HOLD	OFF
TILT ANGLE	0°
RET

** ZONE NUMBER 1*/8 **

RET

ON: Preset privacy zones are veiled on the monitor screen.

OFF: The veiling function does not work.

2.Select a zone number with the joystick, and press the CAM (SET) key.

•A zone number followed by * (asterisk) indicates that the zone has already been registered.

** ZONE NUMBER 1*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE		••••••••
SET	DEL	L	H
RET

•When a zone number having no * is selected, the picture is zoomed out fully.

•When a registered zone number is selected, the camera moves to the preset position. Note that if you move PAN/TILT, ZOOM/FOCUS or ZONE SCALE in that position, the registered zone number having "*" is cancelled.

•The zone frame appears in the center of the screen if 3 or fewer mask areas exist in that picture and if the zone number is not registered yet.

•The privacy zone may appear on the monitor screen depending on the direction of the camera.

•The privacy zone function will not work at start-up immediately after turning the power on.

3. To register a new zone

3-1 For PAN/TILT, move the cursor to PUSH SET and press the CAM (SET) key.

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

ZONE SCALE		••••••••
SET	DEL	L	H
RET

3-2 Adjust the pan and tilt position so that the desired position comes into the zone frame with the joystick.

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

U TILT D/L PAN R

ZONE SCALE		••••••••
SET	DEL	L	H
RET

3-3 For ZOOM/FOCUS, move the cursor to PUSH SET , and press the CAM (SET) key.

** ZONE NUMBER 3*/8 **

PAN/TILT →PUSH SET ZOOM/FOCUS →PUSH SET

U ZOOM D/L FOCUS R

ZONE SCALE		••••••••
SET	DEL	L	H
RET

3-4 Adjust zoom and focus, and press the CAM (SET) key.

Zoom can be adjusted within the range of 1 to 10 magnifications.

3-5 Move the cursor to ZONE SCALE, and move the joystick to the right or left to adjust the zone frame. Press the CAM (SET) key after the adjustment.

-27-