Shutter Speed Setting Shutter | Panasonic WV-CS854B instruction

6.If you want to change the picture contrast, move the "I" cursor for LEVEL and adjust the level.

** ALC CONT **

BACK LIGHT COMP

SUPER-D2	OFF
MASK SET

LEVEL	••••••••
	-	+

RET

7.Move the cursor to RET and press the CAM (SET) key to return to the CAM SET UP menu.

** ALC CONT **

BACK LIGHT COMP

SUPER-D2	OFF
MASK SET
LEVEL	••••••••
	-	+

RET

To return to the camera picture, press the F4 button.

●Shutter Speed Setting (SHUTTER)

Note: When ON is selected for SUPER-D2 on the ALC CONT menu, only OFF and AUTO are available.

To select an electronic fixed shutter speed, select OFF for SUPER-D2 in the menu.

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		AUTO
AGC		ON(MID)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		AUTO L
RET	SPECIAL2

Move the cursor to SHUTTER and select the electronic shutter speed with the joystick. The electronic shutter speed changes as follows with the joystick:

•When OFF is selected for SUPER-D2 on the ALC CONT menu

OFF (1/60)AUTO1/1001/2501/500

1/10 000 1/4 000 1/2 0001/1 000

•In the AUTO mode, an object is clearly imaged under highlighted conditions by using the combination technology of iris and shutter functions.

Note: When the selected shutter speed caused flicker on condition that fluorescent lamps stay on, change this setting to 'OFF'.

●Gain Control [AGC ON (LOW/ MID/ HIGH)/OFF]

Move the cursor to AGC and select ON (LOW), ON (MID), ON (HIGH) or (OFF) with the joystick.

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		AUTO
AGC		ON(MID)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		AUTO L
RET	SPECIAL2

Notes:

•Even if AGC is set to ON and if the noise reduction function is enabled, afterimages may be produced by shooting a moving object or by panning or tilting the camera.

•For more information, refer to Digital Noise Reduction on page 41.

●Electronic Sensitivity Enhancement (SENS UP)

Move the cursor to SENS UP and select the desired electronic sensitivity enhancement mode with the joystick. The electronic sensitivity enhancement mode changes as follows with the joystick:

** SET UP **