-33-
ON: 10 - fold electronic zoom is available with the
ZOOM switch on the controller.
OFF: The electronic zoom function is not used.
Notes:
•A scene magnified by the electronic zoom
function may be inferior in picture quality to a
non-magnified one.
•The electronic zoom does not function in the
preset position setting mode.
•To set preset positions directly from WV-CU360
System Controller, you need to set the electronic
zoom function temporarily to OFF.
●Preset Alarm (PRESET ALM)An alarm output is sent when the camera moves to the
designated position depending on the mode.
1. Move the cursor to PRESET ALARM and select ON
or OFF.
ON: Alarm signals are output in the following cases.
•When a preset positioning sequence is
completed while AUTO MODE is set to SEQ.
•When a preset positioning sequence is
completed while AUTO MODE is set to SORT.
•When the self-return function has returned the
camera to its home position.
•Positioning is completed for a position request
command.
•Positioning to the designated point is completed
for ALARM IN/OUT.
•When positioning to the starting point is
completed while AUTO MODE is set to AUTO
PAN.
•When positioning to the starting point is
completed while PATROL is set to PLAY.
OFF: Alarm signals are not output.
Note: Select OFF when the camera downloads or
uploads the preset data.
●Image Hold (IMAGE HOLD)The camera picture remains as a still image on the
monitor screen until the camera reaches the preset
position. This function is useful for surveillance via local
area network.
1. Move the cursor to IMAGE HOLD and select ON or
OFF.
ON: The last displayed still image is shown till the
camera finishes moving to a preset position.
However, the still image may be distorted with
the effect of panning or tilting.
OFF: The current image is being displayed while
the camera is moving to a preset position.
●Tilt Angle (TILT ANGLE 0°/5 °)You can select the tilting range.
1. Move the cursor to TILT ANGLE and select 0 °or
5°.
0°:The tilting range is between 0°and 180 °.
5°:The tilting range is between –5°and 185°.
Note: When 5°is selected in the WIDE mode, a
subject is not displayed on approximately the
upper half of the screen or the screen becomes
white for some subjects due to the AGC effect.
** SPECIAL 1 **
PRIVACY ZONE OFF
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
CLEANING OFF
EL-ZOOM ON
PRESET ALM ON
IMAGE HOLD OFF
TILT ANGLE 0°
RET
** SPECIAL 1 **
PRIVACY ZONE OFF
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD ON
TILT ANGLE 0°
RET
** SPECIAL 1 **
PRIVACY ZONE OFF
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD ON
TILT ANGLE 0°
RET