Panasonic WV-CW974 operating instructions Operation Examples

Operation Examples

This section describes a number of camera operation examples. For details about operation, see page 41 (Auto Tracking Settings) of this manual, and the user documentation that comes with the peripherals you are using.

Operation Example 1: When			following	a preset
		sequence (with alarm output),
		the camera switches to auto
		tracking when it reaches a
		particular preset		position,
		and then returns to the preset
		sequence after 30 seconds of
		auto tracking.
Alarm Output 1		Auto Tracking Stop
Sequential				Sequential
	Auto Tracking In		30 seconds
Movement				Movement

Progress

1.Configure the PRESET settings (page 33). Register each preset position.

For each registered preset position, select ON for AUTO TRACK for the positions you want to include in the auto tracking. Auto tracking will not include any preset position whose AUTO TRACK setting is OFF.

PRESET NO.		1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
AF MODE	MANUAL L
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••I255
AUTO TRACK	L	H
	ON

RET TOP DEL

2.Configure the AUTO MODE setting (page 35). Select SEQ for the AUTO MODE setting.

**PAN/TILT SETUP**1/2

PRESET	1
MAP
HOME POSITION		OFF
SELF RETURN		OFF
AUTO MODE		SEQ
AUTOPAN KEY		AUTO PAN
PATROL
PRIVACY ZONE		OFF
IMAGE HOLD		OFF
DIGITAL FLIP		ON
PROPO.P/T		ON

3.Configure the AUTO TRACK setting (page 41). Select ON for the ALARM setting.

Configure the other parameters in accordance with the operating environment.

** AUTO TRACKING **

CAMERA HEIGHT	2.50M
OBJECT SIZE	SMALL
SENSITIVITY	MID
TRACKING MODE	MID
ZOOM CONTROL	CONTINUOUS
AUTO RELEASE	OFF
LOST MODE	ZOOM-OUT
ALARM	ON
AREA SET	OFF
INDICATOR
RET TOP

Important: Failure to configure settings in accordance with the operating environment can cause operational errors. Configure the settings while carefully checking the AUTO TRACK setting (page 41).

Note: If the alarm is turned on, an alarm signal is continually output from ALARM OUT 1 while an auto tracking operation is in progress.

4.Configure ALARM IN/OUT settings (page 45). Select ALARM for CNT-CLS1.

**ALARM IN/OUT**

ALARM IN1	OFF
ALARM IN2	OFF
ALARM IN3	OFF
ALARM IN4	OFF
CNT-CLS 1
	ALARM
TIME OUT	100MS
CNT-CLS 2	OFF
COAX ALM OUT	OFF
RET TOP

5.Configure the SELF RETURN setting (page 35). Select either 30S or SEQ.

**PAN/TILT SETUP**1/2
PRESET	1
MAP
HOME POSITION		OFF
SELF RETURN		30S	SEQ
AUTO MODE		SEQ
AUTOPAN KEY		AUTO PAN
PATROL
PRIVACY ZONE		OFF
IMAGE HOLD		OFF
DIGITAL FLIP		ON
PROPO.P/T		ON

Operation Example 2: While		auto			panning,				the
	camera		moves			to		Preset
	Position 1 in accordance with
	input at ALARM IN 1 and then
	performs			auto		tracking.			To
	return	to			auto			panning
	operation			one		minute after
	auto	tracking				starts			(50
	seconds of auto tracking and
	10 seconds of self-return)
Alarm IN 1	Auto Tracking Ends
Auto Panning							Auto Panning
	Auto Tracking Enabled			10 seconds

50 seconds

-21-