**PRESET POSITION**

 

1

 

2*

3*

4*

5*

6*

7*

8*

9*

10*

11*

12*

13*

14*

15*

16*

17*

18*

19*

20*

21*

22*

23*

24*

25*

26*

27*

28*

29*

30*

31*

32*

ID:DOOR 033-064 225-256

RET TOP

(3) Home Position Setting (HOME POSITION)

A currently configured preset position can be designated as the home position.

Pressing the HOME button of the system controller will cause the camera to move to the currently specified home position. Use the following procedure to make a preset position the home position.

1.Move the cursor to HOME POSITION, and then tilt the joystick left or right to select the position number of the preset position you want to make the home position.

This causes the preset position whose position number you select to become the home position. If you do not want to use the home position function, select OFF for the HOME POSITION setting.

(4) Self Return Setting (SELF RETURN)

The self return setting can be used to specify automatic return to a particular mode if a certain amount of time elapses without any operation being performed.

1.Move the cursor to SELF RETURN, and then tilt the joystick left or right to select a self return trigger setting. Tilting the joystick cycles through the self return display in the sequence shown below. (unit: sec, min)

OFF 1S 2S 3S ....... 10S 20S 30S 40S

60MIN

50S

30MIN 20MIN

10MIN 5MIN 3MIN 2MIN 1MIN

2.If you selected any setting other than OFF in step 1, press the CAM (SET) button and then tilt the joystick left or right to select a self return mode.

OFF AUTO HOME APAN SEQ SORT

TRK PTR4 PTR3 PTR2 PTR1

OFF : In the auto mode, exits the auto mode when the trigger time elapses.

AUTO (AUTO MODE setting not OFF) : Returns to the auto mode when the trigger time elapses.

AUTO (AUTO MODE setting OFF) : Returns to the

 

home position when the trigger time

 

elapses.

HOME

: Returns to the home position when the

 

trigger time elapses.

APAN

: Activates auto pan when the trigger

 

time elapses.

SEQ

: Activates the sequence function when

 

the trigger time elapses.

SORT

: Activates the sort function when the

 

trigger time elapses.

-35-

PTR 1 to 4: Activates the patrol function when the trigger time elapses.

TRK : After the trigger time elapses, the camera returns to the home position and then automatic tracking starts. Following that, after a set time, the camera returns to the home position and auto tracking repeats.

Notes:

The HOME setting should be selected when you want to normally leave the camera in the home position and occasionally perform pan and tilt, or when you want to activate SEQ.

PTR1-4 displays only the set number of patrol routines (page 37).

(5)Auto Mode Setting (AUTO MODE)

Use the auto mode setting to specify the camera movement mode (OFF, SEQ, SORT, AUTO PAN, PATROL 1~4, AUTO TRACK).

After selecting AUTO PAN, you can use the AUTO PAN setting menu to configure detailed settings.

1.Move the cursor to AUTO MODE, and then tilt the joystick left or right to select a camera movement mode setting.

OFF

: Manual movement only

SEQ

: Sequentially switches between preset

 

positions in position number sequence.

 

(sequential movement)

SORT : Sequentially switches between preset

 

positions counterclockwise, starting from

 

the camera home position. (sort movement)

AUTO PAN:Camera pans automatically within the range specified by PAN. Selecting AUTO PAN and pressing the CAM (SET) button will display the AUTO PAN setting menu, which can be used for configuring detailed settings. (page 36)

PATROL 1 to 4:Operates the camera in accordance with patrol function settings.

AUTO TRACK:Auto tracking is done for moving objects.

Tilting the joystick cycles through settings in the sequence shown below.

OFF SEQ SORT AUTO PAN PATROL1 PATROL2 AUTO TRACK PATROL4 PATROL3

Notes:

The auto mode is exited automatically whenever manual PAN/TILT or ZOOM/FOCUS is performed if AUTO PAN is operating and PAN/TILT does SEQ, SORT, PATROL, or AUTO TRACK movement. Note, however, that that the contents of the setting menu do not change. To return to the auto mode, open the setup menu and then close it again. The auto mode will also activate when the self return trigger time (this page) elapses.

During operation, the lens may enter the refresh mode.

PATROL1-4 displays only the set number of patrol routines (page 37).

Page 35
Image 35
Panasonic WV-CW974 operating instructions Home, Apan, Seq, Sort