●Auto Focus (AF MODE)
1. Move the cursor to AF MODE, and then tilt the joystick left or right to select an
after moving to a preset position.
AUTO S.M.L : Auto focus operates after moving to a preset position.
●Sequence/Sort DWELL Time
(DWELL TIME)
This section explains how to set the length of time the camera stops (time it stops rotating) and tapes the scene while in the various preset positions for the sequence and sort operations (page 35).
1.Move the cursor to DWELL TIME, and then tilt the joystick left or right to select a DWELL time setting. Tilting the joystick cycles through the stop time display in the sequence shown below. (unit: sec, min)
2S ↔ 3S ↔ 5S ↔ 10S ↔ 30S ↔ 1MIN 
4MIN ↔ 3MIN ↔ 2MIN 
PRESET NO. | 1* | |
POSITION SET |
|
|
PRESET ID | ON |
|
ALC/MANUAL | ALC |
|
AF MODE | MANUAL L | |
DWELL TIME | 10S |
|
SCENE FILE | OFF |
|
PRESET SPEED | ••••••I255 | |
AUTO TRACK | L | H |
OFF |
| |
RET TOP DEL
●Scene File Setting (SCENE FILE)
Up to 10 scene files, each of which contains camera settings for a specific location (scene), can be stored in memory. Scene files are managed using scene file numbers from 1 through 10, and can be selected when configuring preset position settings.
The following procedures explain how to select a scene file and how to configure scene file settings.
(1) Selecting a Scene File
Use this procedure when you want to apply the settings of a previously stored scene file when you are configuring the settings of a preset position.
1.Move the cursor to SCENE FILE, and then tilt it left and right to select the number of the scene file you want to select.
PRESET NO. | 1* |
| |
POSITION SET | ON |
|
|
PRESET ID |
|
| |
ALC/MANUAL | ALC |
|
|
AF MODE | MANUAL L | ||
DWELL TIME | 10S |
|
|
SCENE FILE | 1 |
|
|
PRESET SPEED | ••••••I255 | ||
| L | H | |
AUTO TRACK | OFF |
|
|
RET TOP DEL
(2) Configuring Scene File Settings
1.Move the cursor to SCENE FILE, and then tilt it left and right to select the number of the scene file whose settings you want to configure.
**SCENE | FILE 1** |
SHUTTER | OFF |
AGC | ON(MID) |
SENS UP | OFF |
WHITE BAL | ATW1 |
MOTION DET | OFF |
RET TOP
2.Press the CAM (SET) button.
This will display the scene file setting menu.
The following items can be set on the Scene file settings menu. See camera settings for details on each setting.
•SHUTTER (page 29)
•AGC (page 29)
•SENS UP (page 29)
•WHITE BAL (pages 30, 31)
•MOTION DET (page 44)
●Preset Speed Setting (PRESET SPEED)
Set the speed the camera moves to the various preset positions for the sequence and sort operations (page 35).
1.Move the cursor to PRESET SPEED, and then tilt the joystick left or right to change the speed setting. Shifting the setting towards the L side decreases the speed, while shifting towards the H side increase it.
PRESET NO. | 1* |
| |
POSITION SET |
|
|
|
PRESET ID | ON |
|
|
ALC/MANUAL | ALC |
|
|
AF MODE | MANUAL L | ||
DWELL TIME | 10S |
|
|
SCENE FILE | OFF |
|
|
PRESET SPEED | ••••••I | 255 | |
| L | H | |
AUTO TRACK | OFF |
|
|
RET TOP DEL
●Setting Auto Tracking for a Preset Position (AUTO TRACK)
Set auto tracking for the various preset positions for the sequence and sort operations (page 35).
1.Move the cursor to AUTO TRACK, and then tilt the joystick left or right to select an auto tracking setting.
ON | : Enable auto tracking. |
OFF | : Disable auto tracking. |
●Deleting a Preset Position (DEL)
1.Move the cursor to DEL, and then press the CAM (SET) button.
This deletes the contents of the currently selected position number and displays the position selection menu.
PRESET NO. | 1* | |
POSITION SET |
|
|
PRESET ID | ON |
|
ALC/MANUAL | ALC |
|
AF MODE | MANUAL L | |
DWELL TIME | 10S |
|
SCENE FILE | OFF |
|
PRESET SPEED | ••••••I255 | |
| L | H |
AUTO TRACK | OFF |
|
RET TOP DEL
